INDEX

1
Local Removal of Thick Anodic Oxide Film on Aluminum with a Photon Rupture Technique and Local Metal Deposition H. Takahashi

[Electrochemistry, 71, (2003)920-926]
2
Three-dimensional Microstructure Fabrication with Anodizing, Laser Irradiation, and Electrodeposition H. Takahashi

[Journal of the Electrochemical Society, 150, (2003)C567-C572]
3
Formation of Black Anodic Films on Aluminum in Acid Electrolytes Containing Titanium Complex Anion H. Konno

[Surface and Coatings Technology, Vol. 169-170(2003), pp. 155-159]
4
Formation of Barrier-type Amorphous Anodic Films on Ti-Mo Alloys H. Konno

[Surface and Coatings Technology, Vol. 169-170(2003), pp. 151-154]
5
Influences of Structure and Composition on Growth of Anodic Oxide Films on Ti-Zr Alloys H. Konno

[Electrochimica Acta, Vol. 48(2003), pp. 3257-3266]
6
Effect of Citric Acid on Corrosion Behavior of 1100 Aluminum O. Seri

[J. Japan Inst. Light Metals, vol.54, No. 1, (2004), pp. 19-24]
7
Titanium-Implanted CaTiO3 Films and Their Changes in Hanks' Solution K. Asami

[Surface and Interface Analysis, Vol. 35, No. 5(2003), pp. 483-488]
8
XPS Study of Corrosion Behavior of Ti-18Nb-4Sn Shape Memory Alloy in a 0.05 mass% HCl Solution K. Asami

[Materials Transaction, Vol. 44, No. 7(2003), 1405-1411]
9
Electrical and Thermal Conductivities in Quenched and Aged High-Purity Cu-Ti Alloys Y. Waseda

[Scripta Materialia, Vol. 48(2003), pp. 431-435]
10
High Strain Rate Superplastic Behavior of Al-Li-Mg-Cu-Sc Alloy Subjected to Severe Plastic Deformation Y. Motohashi

[Proc. NATO Advanced Research Workshop, Kyev, (2004)pp. 31-36]
11
Superplastic Response of an Advanced Al-Li-Mg-Cu-Sc Alloy Subjected to Intense Plastic Deformation Y. Motohashi

[Materials Transactions, Vol. 44, No. 9(2003), pp. 1698-1701]
12
Behavior of Hydrogen in Al-Mg Alloys Investigated by Means of Hydrogen Microprint Technique G. Itoh

[The Journal of Japan Institute of Light Metals, Vol. 53, No. 12(2003). pp. 575-581]
13
Tribological Properties of Mg(OH)2 Coating on Magnesium Alloys by Anodic Treatment M. Takaya

[Journal of Japan Institute of Light Metals, Vol. 53, No. 12(2003). pp. 595-600]
14
Annealing Behavior of Local Zones of a 1070-H26 Aluminum Sheet by CO2 Laser Irradiation K. Nakamura

[Journal of Japan Institute of Light Metals, Vol. 53, No. 10(2003). pp. 421-426]
15
Effect of Sc and Zr Addition on Structures and Mechanical Properties of Rapidly Solidified 7090 Based Alloys M. Sugamata

[Journal of Japan Light Metals, Vol. 53, No. 5(2003). pp. 212-217]
16
Effects of Tool Radius on Formability during Deep Drawing of AZ31 Magnesium Alloy Sheets N. Koga

[Journal of Japan Institute of Light Metals, Vol. 53, No. 4(2003). pp. 152-156]
17
Environmental Embrittlement of Al-Zn-Mg-Cu Alloys with Cr or Zr M. Kanno

[Materials Science Forum Vols. 426-432, 2003, pp. 345-350]
18
Electron Momentum Distribution of Icosahedral Cd84Yb16 Studied by Compton Scattering S. Nanao

[Physical Review B, Vol. 68(2003), pp. 132204-1-4]
19
Effect of Ru Substitution for Re on the Thermoelectric Properties of AlPdRe Icosahedral Quasicrystals K. Kimura

[Journal of Applied Physics, Vol. 94, No. 10(2003), pp. 6560-6565]
20
Covalent Bonds and Their Crucial Effects on Pseudogap Formation in α-Al(Mn, Re)Si Icosahedral Quasicrystalline Approximant K. Kimura

[Physical Review B, Vol. 68, No. 1(2003), pp. 014205-1-12]



21
Roles of Microalloying Elements on the Cluster Formation in the Initial Stage of Phase Decomposition of Al-based Alloys T. Sato

[Journal of Metallurgical and Materials Transactions A, Vol. 34A, No. 12(2003), pp. 2745-2755]
22
Growth of Anodic Porous Alumina with Square Cells S. Ono

[Electrochimica Acta, Vol. 48(2003), pp. 3171-3174]
23
Evaluation of Pore Diameter of Anodic Porous Films Formed on Aluminum S. Ono

[Surface and Coatings Technology, 169-170, 139-142(2003)]
24
Microstructure and Voltage-Current Characteristics of Anodic Films Formed on Magnesium in Electrolytes Containing Fluoride S. Ono

[Materials Transaction 44, (4), 539-545(2003)]
25
Anodic Films Grown on Magnesium and Magnesium Alloys in Fluoride Solutions S. Ono

[Materials Science Forum, 419-422, 897-902(2003)]
26
Anodizing of Magnesium in Amine-Ethylene Glycol Electrolyte S. Ono

[Materials Science Forum, Vol. 419-422 (2003), pp. 957-962]
27
Microstructure of Anodic Films Grown on Magnesium-Lithium-Yttrium Ultra Light Alloy S. Ono

[Materials Science Forum, 426-432 (2003), pp. 581-586]
28
Self-Ordering Behavior of Anodic Porous Films Formed on Aluminum S. Ono

[ATB Metallurgie, Vol. 43, No. 1-2(2003), pp. 41-44]
29
Design of Three-Dimensional Porous Structure of Anodic Alumina Using Heat Treatment and Acid Dissolution S. Ono

[ATB Metallurgie, Vol. 43, No. 1-2(2003), pp. 319-322]
30
Transfer of Nanoporous Pattern of Anodic Porous Alumina into Si Substrate S. Ono

[Applied Physics Letters, Vol. 83, No. 21(2003), pp. 4408-4410]
31
Relationship between Pore Diameter to Cell Diameter Ratio and Self-Ordering of Anodic Porous Alumina S. Ono

[Electrochemistry, Vol. 71, No. 2(2003), pp. 105-107]
32
Grain Refinement in As-Cast 7475 Aluminum Alloy under Hot Equal-Channel Angular Pressing T. Sakai

[Materials Transactions, Vol. 44, (2003), pp.766-774]
33
Grain Fragmentation in a Coarse-Grained 7475 Al Alloy during Hot Deformation T. Sakai

[Scripta Materialia Vol. 51, (2004), pp. 175-179]
34
Formation Mechanism of Texture during Dynamic Recrystallization in γ-TiAl, Nickel and Copper Examined by Microstructure Observation and Grain Boundary Analysis Based on Local Orientation Measurements H. Fukutomi

[Acta Materialia, Vol. 51, (2003), pp. 3939-3950]
35
Chromate Conversion Coatings on Aluminium: Influences of Alloying K. Shimizu

[Corrosion Science, Vol. 46, No. 3(2004), pp. 297-313]
36
Hot Extrudability of Mg-Al-Zn Based Alloy Cutting Chips and Surface Properties of Extrusions K. Matsuki

[Journal of Japan Institute of Light Metals, Vol. 54, No. 5(2004), pp. 14-18]
37
Strengthening of Aluminum Alloy Pipes by Back-torsion Working H. Anada

[Journal of Japan Institute of Light Metals, Vol. 53, No. 4(2003), pp. 169-175]
38
The Effect of Cu, Ag and Au Addition on Total Elongation and Fracture Morphology in Al-Mg-Si Alloys S. Ikeno

[Journal of Japan Institute of Light Metals, Vol. 53, No. 11(2003), pp. 528-533]
39
Effects of Thermomechanical Processings on Fatigue Properties of Ti-29Nb-13Ta-4.6Zr for Biomedical Applications M. Niinomi

[J. Japan Inst. Metals, Vol. 67, No. 11(2003), pp. 652-660]
40
Fatigue Performance and Cyto-Toxicity of Low Rigidity Titanium Alloy, Ti-29Nb-13Ta-4.6Zr M. Niinomi

[Biomaterials, Vol. 24(2003), pp. 2673-2683]



41
Fatigue and Fretting Fatigue of Biomaterial, Ti-29Nb-13Ta-4.6Zr, in Air and Simulated Body Environment M. Niinomi

[Materials Lifetime Science & Engineering, Edited by P. K. Liaw, R. A. Buchanan, R. P. Wei, D. G. Harlow and P. F. Tortorelli, TMS(2003), pp. 223-230]
42
Fretting Fatigue and Frictional Wear Characteristics of a High Workable Ti-4.5%Al-3%V-2%Mo-2%Fe Alloy M. Niinomi

[Journal of Japan Institute of Light Metal, Vol. 53, No. 6(2003), pp. 251-257]
43
Effects of Contact Pressure and Surface Roughness on Fretting Fatigue Characteristics of a High Workable Ti-4.5%Al-3%V-2%Mo-2%Fe Alloy M. Niinomi

[Journal of Japan Institute of Light Metal, Vol. 53, No. 12(2003), pp. 563-569]
44
Contribution of Local Atomic Arrangements and Electronic Structure to High Electrical Resistivity in the Al82.6-xRe17.4Six(7≦x≦12) 1/1-1/1-1/1 Approximant U. Mizutani

[Physical Review B 68, 184203(2003)]
45
Thermoelectric Properties of the Al-TM-Si(TM= Mn, Re)1/1-cubic Approximant U. Mizutani

[Materials Research Society Symposium Proceeding Vol. 805(2004)]
46
Foaming Behavior of Porous Aluminum by Heating of Precursors of Al-TiH2 Powder N. Kanetake

[Journal of Japan Institute of Light Metals, Vol. 53, No. 10(2003), pp. 427-432]
47
Scanning Electron Microscopy Observations of Fractal Pattern Formation in Al/Ge Bilayer Films M. Doi

[Materials Science Forum, Vols. 449-452(2004), pp. 445-448]
48
Phase-Separated Microstructures in Ti-Al Binary Alloy Systems M. Doi

[Ti-2003, Science Technology (Proc. of 10th World Conf. on Titanium), Vol. 2, ed. G. Lütjering and J. Albrecht, Wiley-VCH, Weinheim, 2004, p. 1075]
49
Relationship between Stress Corrosion Resistance and Microstructure of Rapidly Solidified Al-Zn-Mg Alloys K. Osamura

[Journal of Japan Institute of Light Metals, Vol. 54, No. 2(2004), 69-74]
50
Application of GI-SAXS to Near-surface Microstructures in Al-Based Alloys S. Ochiai

[Transactions of the Materials Research Society of Japan, Vol. 28, (2003), pp. 27-30]
51
Tensile Properties and Press Formability of a Mg-9Li-1Y Alloy Sheet H. Takuda

[Materials Transactions, Vol. 44, No. 11(2003), pp. 2266-2270]
52
Enhanced Densification of Combustion Synthesized Ni-Al or Ti-Al Intermetallic Compounds by Third Element Addition K. F. Kobayashi

[Materials Science Forum, Vols. 426-432, (2003), pp. 1789-1794]
53
Reactive Wetting of SiO2 Substrates by Molten Al K. Nogi

[Mater. Metall. Trans. 35A(2003), 583-588]
54
A Basic Study toward Automated Sorting of Aluminum Scraps T. Takemoto

[Proc. EcoDesign 2003, Third International Symposium on Environmentally Conscious Design and Manufacturing, Tokyo, December 8-11, (2003), pp. 510-514]
55
Measurement and Analysis of Sound Absorption of Porous Magnesium H. Nakajima

[Materials Science Forum, Vols. 449-452(2004), pp. 661-664]
56
The Energetics and Structural Relaxation of Constitutional Defects in CoAl and CoTi from First Principles Y. Shirai

[Physical Review B, Vol. 68, No. 14(2003), pp. 114103-1-114103-14]
57
High Damping Capacity of Ultra-Fine Grained Aluminium Produced by Accumulative-Roll-Bonding(ARB) Y. Minamino

[J. Alloys and Compounds, Vol. 355, No. 1(2003), pp. 47-51]
58
One-Pot Process for Anodic Oxide Films of Titanium with High Photocatalytic Activity S. Ito

[Materials Transactions, Vol. 45(2004), 1607-1612]
59
Microstructure and Dry Sliding Wear of Ti-50Al Alloy and Ti-47Al-3W/Ti2AlC Composite Produced by Reactive Arc-Melting H. Mabuchi

[Materials Transactions, Vol. 44, No. 9(2003), pp. 1861-1865]
60
Molecular Dynamics Simulation of Triazine Dithiol/ MgO Interface K. Higashi

[Materials Science Forum, Vol. 419-422(2003), pp. 943-948 ]



61
Plane-Strain Fracture Toughness on Thin AZ31 Wrought Magnesium Alloy Sheets K. Higashi

[Materials Transactions, Vol. 44, No. 5(2003), pp. 986-990]
62
Superplastic Behavior of an ECAE Processed ZK60 Magnesium Alloy K. Higashi

[Mater. Sci. Forum, Vols. 419-422(2003), pp. 557-562]
63
Mechanical Properties of Mg-Y-Zn Alloy Processed by Equal-Channel-Angular Extrusion K. Higashi

[Mater. Trans., Vol. 44-4, (2003), pp. 463-467]
64
Materials Processing for Structural Stability in a ZK60 Magnesium Alloy K. Higashi

[Mater. Trans., Vol. 44-4, (2003), pp. 775-781]
65
Diffusion Bonding in Commercial Superplastic AZ31 Magnesium Alloy Sheets K. Higashi

[Key Engineering Materials, Vols. 233-236, (2003), pp. 857-862]
66
Low Temperature Diffusion Bonding in a Superplastic AZ31 Magnesium Alloy K. Higashi

[Scripta Materialia, Vol. 48, (2003), pp. 1249-1254]
67
Application of Magnesium Alloys Coated with High Purity Mg for Engineering Usage H. Tsubakino

[Proc. 6th Inter Conf. Magnesium Alloys and Their Applications, 2003, pp. 568-573]            
68
Corrosion Behavior in Artificially Corrosion-oxidation Treated Mg Alloys H. Tsubakino

[Proc. 6th Inter Conf. Magnesium Alloys and Their Applications, 2003, pp. 580-585]            
69
Grain Refinement on AZ31 Magnesium Alloy by Highly Strained and Annealed Method H. Tsubakino

[Materials Science Forum, Vols. 449-452(2004), pp. 669-672]
70
Hydrogenation Characteristics of New Magnesium-based Intermetallic Compounds Including Group 14 Elements T. Esaka

[Hydrogen Energy System, Vol. 28, No. 1(2003), pp. 54-60]
71
Impact Tensile Stress-strain Characteristics of Wrought Magnesium Alloys T. Yokoyama

[Strain, Vol. 39, No. 4(2003), pp. 167-175]
72
Impact Performance of Friction Welded Butt Joints between 6061-T6 Aluminum Alloy and Type 304 Stainless Steel T. Yokoyama

[Materials Science and Technology, Vol. 19, No. 10(2003), pp. 1418-1426]
73
In-situ Observation of Brownian Motion of Helium Bubbles and Dynamical Response to Irradiation of Helium Bubbles in Aluminum and Copper K. Ono

[Electron Microscopy: Its Role in Materials Science, eds. J. Weertman and M. Fine, TMS, 2003, pp. 347-354]
74
Study on Structure of Pseudo-Shock Waves in Under-Expanded Jet T. Kojima

[Journal of the Visualization Society of Japan, Vol. 23, Suppl. No. 1, (2003), pp. 53-56]
75
Intergranular Corrosion and SCC Properties of Al-Mg-Si Alloy Sheets S. Osaki

[J. of Japan Inst. of Light Metals, Vol. 53, No. 4(2003), pp. 157-162]
76
AE Signals Caused by Environmental Embrittlement of an Al-Mg-Si Alloy Deformed at Slow Strain Rates in Laboratory Air K. Yoshida

[Journal of Japan Institute of Light Metals, Vol. 53, No. 4(2003), pp. 147-151]
77
Decomposition Processes of β Phase in a Ti-15Zr-4Nb-4Ta Alloy K. Nakai

[Mater. Trans., Vol. 45, No. 5, (2004), pp. 1624-1628]
78
Equal-Channel Angular Pressing Using Plate Samples Z. Horita

[Materials Science and Engineering, A361 (2003), pp. 258-266,]
79
Using Grain Boundary Engineering to Evaluate the Diffusion Characteristics in Ultrafine-grained Al-Mg and Al-Zn Alloys Z. Horita

[Materials Science and Engineering, A371(2004), pp. 241-250]
80
Microstructural Control of a Precipitate-Hardenable Al-Ag Alloy Using Severe Plastic Deformation Z. Horita

[Materials Science Forum, 426-432(2003), pp. 2637-2642]



81
Influence of Channel Geometry on Superplasticity in Equal-Channel Angular Pressing Z. Horita

[Materials Science Forum, 447-448(2003), pp. 477-482]
82
Diffusion Analysis Across Grain Boundary in Al-3.7mass%Cu Alloy Using Analytical Electron Microscopy Z. Horita

[Materials Transaction, 44(2003) pp. 1336-1342 ]
83
Developing Superplasticity in a Spray-Cast Aluminum 7034 Alloy though Equal-Channel Angular Pressing M. Furukawa

[Materials Letters, 57(2003), pp. 3588-3592]
84
Using ECAP to Achieve Grain Refinement, Precipitate Fragmentation and High Strain Rate Superplasticity in a Spray-Cast Aluminum Alloy M. Furukawa

[Acta Materialia, 51(2003), pp.6139-6149]
85
The Application of Equal-Channel Angular Pressing to an Aluminum Single Crystal M. Furukawa

[Acta Materialia, 52(2004), pp.1387-1395]
86
Microstructural Developing in Equal-Channel Angular Pressing Using a 60 Degrees Die M. Furukawa

[Acta Materialia, 52(2004), pp.2497-2507]
87
Novel Recycling System of Aluminum and Iron Wastes - in-situ Al-Al3Fe Functionally Graded Material Manufactured by a Centrifugal Method - Y. Fukui

[Materials Transactions, Vol. 44, No. 12(2003), pp. 2461-2467]
88
The Effect of Atmosphere on the Creep Deformation of a Particle Reinforced Aluminum Alloy Matrix Composites N. Matsuda

[Mater. Sci. Eng., Vol. A387-389, pp. 643-646(2004)]
89
High Temperature Ductility and Deformation Mechanism in a 2024 Aluminum Alloy Y. Takayama

[Materials Science Forum, Vols. 447-448(2004), pp. 271-276]
90
High Temperature Deformation and Crystallographic Orientation Distribution for an Al-Mg-Mn Alloy Sheet Worked by Continuous Cyclic Bending Y. Takayama

[Materials Science Forum, Vols. 447-448(2004), pp. 471-476]
91
Wear Resistance of Alloy Tool Steel Surface-Modified by Quenching/ Aluminum Film Deposition/ Diffusion/ Nitriding T. Furusawa

[Proceedings of the International Conference on Leading Edge Manufacturing in 21st Century, JSME, (2003), pp. 561-564]
92
Improvement of Corrosion Resistance and Mechanical Properties of Biomaterial (Ti-6Al-4V Alloy) by ELID Grinding K. Katahira

[Advances in Abrasive Technology VI, (2003), 473-476]
93
Metastable Phase Responsible for Peak Hardness and Its Morphology in an Al-Mg-Si Alloy M. Takeda

[Proceedings of the 5th Pacific Rim International Conference on Advanced Materials and Processing, Beijing 2004, pp. 365-368]
94
Evaluation of Serration Using the Fast Fourier Transform Method Y. Nakayama

[J. Japan Institute of Light Metals, Vol. 54, No. 2(2004), pp. 51-56]
95
New Vacancy Source in Ultrahigh-Purity Aluminum Single Crystals with a Low Dislocation Density K. Mizuno

[Journal of Physical Society of Japan, Vol. 73, No. 5(2004), pp. 1101-1102]
96
Evaluating Fretting Fatigue Life of Titanium Alloy Dovetails by Using Stress Singularity Parameters T. Yoshimura

[Journal of the Materials Science Society of Japan, Vol. 40, No. 6(2003), pp. 41-46]
97
Material Mechanical Properties and Microstructure of Magnesium Alloy Matrix Composites Fabricated by Casting Process G. Sasaki

[Mat. Sci. Forum, 426-432(2003), 2015-2020]
98
Activated Slip Systems and <111> Rotation Recrystallization Mechanism in Aluminum Single Crystal of 99.999mass% Purity Tensile-deformed along <001> Direction at 77K T. Okada

[Journal of Japan Institute of Metals, Vol. 68, No. 5(2004), pp. 342-349]
99
Quaternary Diffusion in α Solid Solution of the Al-Cu-Mg-Ag System T. Takahashi

[Mater. Trans., Vol. 44, No. 11, (2003), pp. 2252-2257]
100
Effect of Thermo-mechanical Treatment on Cube Texture in Aluminum Foils for Electrolytic Capacitor H. Nakashima

[Journal of Japan Institute of Light Metals, Vol. 53, No. 5(2003), 218-223]
101
Refined Solidification Structure and Improved Formability of A356 Aluminum Alloy Plate Produced Using a High-Speed Twin-Roll Strip Caster S. Kumai

[Materials Transactions, Vol. 45, No. 2(2004), pp. 403-406 ]




Copyright (C) 2005 The Light Metal Educational Foundation, Inc. All rights reserved.