1 Anodic Films Obtained on Ti6Al4V in Aluminate Solutions by Spark Anodizing: Effect of OH- and WO4-2 Additions on the Tribological Properties H. Habazaki [Surface & Coatings Technology, 310(2017)180-189]
2 Extrapolation of Imaginal Minimum Creep Rate in Compression by a Concept of SATO-Index H. Sato [Key Engineering Materials Vols. 741 (2017), pp. 99-104]
3 TiO2 Layers on Ti-Au Alloy Formed by Two-Step Thermal Oxidation and Their Photocatalytic Activity in Visible-Light T. Narushima [Materials Letters, Vol. 185(2016), pp. 290-294]
4 Hydrogen Behavior in a Tensile-Deformed Al-Zn-Mg Alloy G. Itoh [Journal of the Japan Institute of Metals and Materials, Vol. 80, No. 12(2016), pp. 726-730]
5 Relationship between Hydrogen Embrittlement and Second-Phase Particles in a 7075 Aluminum Alloy G. Itoh [Journal of the Japan Institute of Light Metals, Vol. 67, No. 3(2017), pp. 67-71]
6 Friction Stir Diffusion Bonding in Foils of Aluminum Alloys with Different Solidus Temperatures and Titanium Y. Takayama [Proc. PRICM9(JIM, 2016), pp. 629-634]
7 Modelling and Analysis of High Strain Rate Deformation at Elevated Temperature in Friction Stirring of Aluminum Alloys Y. Takayama [Materials Science Forum, Vol. 838-839(2016), pp. 110-115]
8 Effect of Coat Permeability on Melt Velocity of Molten Aluminum Alloy in Expendable Pattern Casting Process S. Koroyasu [Materials Transactions, (2016), pp. 1581-1586]
9 Investigation of High Speed Friction Test for Aluminum Alloys S. Takahashi [Journal of Physics, Conference Series 734(2016), 032040, pp. 1-4]
10 Effect of Hypoeutectic Si Contents on Mechanical Properties of Rapidly Solidified Al-Mg-Si Alloys M. Kubota [Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 63, No. 4 (2016), pp. 166-171]
11 Plateau Stress Estimation of Impact Compression Test on Aluminum Foam Using X-ray Computed Tomography Observation T. Utsunomiya [Mechanical Engineering Journal, Vol. 3, No. 6(2016), Article ID: 16-00149]
12 Cytocompatibility of Ti-6Al-7Nb through High-Pressure Torsion Processing T. Hanawa [Materials Transactions, Vol. 57, No. 12(2016), pp. 2020-2025]
13 Effect of Anomalous Crystal Structure of Iron Aluminides Fe2Al5 and Fe4Al13: Low Phonon Thermal Conductivity and Potentiality as Thermoelectric Materials K. Kimura [Materials Transactions Vol. 57(2016) pp. 1045-1049]
14 AE Analysis of Compression Test with Different Loading Direction of Unidirectional Solidification LPSO-Mg Alloys M. Enoki [J. Japan Inst. Met. Mater. Vol. 80, No. 11(2016), pp. 697-701]
15 Evaluation of the Deformation Behavior in Directionally Solidified Mg-Y-Zn Alloys Containing LPSO Phases by AE Analysis M. Enoki [Materials Science & Engineering A 689(2017) 157-165]
16 Effect of Groove Shape and Dimension of Die on Formability in Tube Extrusion with Spiral Inner Projections T. Kuboki [The 9th Pacific Rim International Conference on Advanced Materials and Processing, 2016, pp. 38-41]
17 Fabrication of Aluminum Nanowires by Mechanical Deformation of Al Using Anodic Porous Alumina Molds H. Masuda [Mater. Express, Vol. 6, No. 4, (2016), pp. 363-366]
18 Evolution of Microstructure and Mechanical Properties of Al 6061 Alloy Tube in Cyclic Rotating Bending Process K. Manabe [Materials Science & Engineering A, Vol. 676(2016), pp. 80-87,]
19 Aging Property of AZ91D Magnesium Alloy Screw Thread-Rolled at Room Temperature Using Extrusion-Torsion Simultaneous Processing M. Furui [Materials Science Forum, Vol. 879, (2017), pp. 2450-2455]
20 Anodization of Au Thin Film on Al in Oxalic Acid K. Nishio [Electrochemistry Communications, Vol. 82, (2017), pp. 30-33]
21 Concurrent Strengthening of Ultrafine-Grained Age-Hardenable Al-Mg Alloy by Means of High-Pressure Torsion and Spinodal Decomposition S. Hirosawa [Acta Materialia, 131(2017), pp. 57-64]
22 Effects of Rapid Solution Treatment by Induction Heating on Microstructure and Hardness of JIS ADC12 High Pressure Die Castings Y. Nakayama [Journal of Japan Foundry Engineering Society, Vol. 89, No. 5, pp. 231-238(2017)]
23 Extra Electron Diffraction Spots Caused by Fine Precipitates Formed at the Early Stage of Aging in Al-Mg-X (X=Si, Ge, Zn)-Cu Alloys K. Matsuda [Materials Transactions, Vol. 58, No. 2(2017), pp. 167-175]
24 Growth Kinetics of Ellipsoidal X-precipitates in a Ti-20 wt%Mo Alloy under Compressive Stress C. Watanabe [Journal of Materials Science, Vol. 51(2016), pp. 8880-8887]
25 Bending Collapse Behaviour of Hat-Shaped Tubular Structure Strengthened with CFRP Sheet M. Yamashita [Advances in Materials and Processing Technologies, Vol. 2, Iss. 4, 2016, 10pages]
26 Osteoconductivity of Protein Adsorbed Titanium Implants Using Hydrothermal Treatment M. Okido [Materials Science Forum, Vol. 879, pp. 1049-1052]
27 Grain Refinement Performance of Pure Al by Unstable Nucleation Sites Y. Watanabe [Proceedings of The 9th Pacific Rim International Conference on Advanced Materials and Processing, PRICM 2016, The Japan Institute of Metals and Materials, 332-337(2016)]
28 Microstructure of Al-Al3Ti Functionally Graded Materials Fabricated by Centrifugal Solid-Particle Method and Centrifugal in Situ Method Y. Watanabe [Jpn J. Appl. Phys., 56, No. 1S, 01AG01(11 pages) (2017)]
29 Decomposition of Al2.7Fe0.3Ti in Heated Al-Al2.7Fe0.3Ti Refiner Fabricated by Spark Plasma Sintering and its Refining Performance Y. Watanabe [Jpn J. Appl. Phys., 56, No. 1S, 01AG02(7 pages) (2017)]
30 Grain Refinement Performance of Aluminum Cast by Addition of Spherical Al3Ti Particles Fabricated by Gas Atomization Method Y. Watanabe [J. Jpn. Inst. Light Met., 67, No. 6, 208-213 (2017).]
31 Effects of Strain Rate during Multi-Directional Forging on Grain Refinement and Mechanical Properties of AZ80Mg Alloy H. Miura [Mater. Trans, Vol. 57(2016), pp. 1418-1423]
32 Development of Thermoelectric Materials Consisting Solely of Environmental Friendly Elements T. Takeuchi [Materials Transactions, Vol. 57, No. 7 (2016) pp. 1029 to 1034. doi:10.2320/matertrans.MF201613]
33 Work-Hardening Behavior of Commercially Pure Titanium JIS Grade 1 Sheet upon Reverse Loading H. Takuda [AIP Conference Proceedings, 1769(2016), 200001]
34 Self-Heating Bonding of A5056 Aluminum Alloys Using Exothermic Heat of Combustion Synthesis A. Hirose [Materials and Design, Vol. 113(2017), pp. 109-115]
35 First-Principles Study of Transformation Strains and Phase Stabilities in α" and β Ti-Nb-X Alloys K. Higashi [Journal of Alloys and Compounds, Vol. 716 (2017), pp. 37-45]
36 Recrystallization Texture Evolution during Three-Step Annealing for 6022 Aluminum Alloy Sheets Processed by Cold Rolling and Differential Speed Warm Rolling H. Inoue [Journal of the Japan Institute of Light Metals, Vol. 66, No. 11 (2016), pp. 617-620]
37 Surface Modification of Magnesium Alloy by Shot Lining and Laser Heating Y. Harada [Materials Science Forum, Vol. 879, 2017, Pages 703-708]
38 Surface Modification of Aluminium Alloy by Shot Lining and Laser Y. Harada [Proceedings of the Ninth Pacific Rim International Conference on Advanced Materials and Processing, No. 46, 2016, Pages 529-531]
39 Effect of Preparation Conditions of TiB2 Particle Dispersed Al Composites on Microstructure G. Sasaki [Materials Science Forum, 879(2017), pp. 1674-1678]
40 Effect of Surface Treatment for Aluminum on Adhesion between A5052 Aluminum Alloy and Polyamide Resin M. Hino [J. Surf. Finish Soc. Jpn., Vol. 67, N.12(2016), pp. 691-693]
41 Achieving Superplasticity of Ultrafine-Grained Rod-Like AZ61 Alloy Using High-Pressure Sliding Z. Horita [Journal of The Japan Institute of Metals and Materials, 80(2) (2016), pp. 128-133]
42 Extra Strengthening and Superplasticity of Ultrafine-Grained A2024 Alloy Produced by High-Pressure Sliding Z. Horita [Journal of The Japan Institute of Metals and Materials, 80(9) (2016), pp. 593-601]
43 Scaling-up of High-Pressure Sliding(HPS) for Grain Refinement and Superplasticity Z. Horita [Metallurgical Materials Transactions A, 47 (2016), pp. 4669-4681]
44 Effects of Scandium and Zirconium Addition on Recrystallization Behavior of Al-Mg-Si Alloy H. Nakashima [Journal of The Japan Institute of Light Metals, Vol. 66, No. 11(2016), pp. 609-616]
45 Diffraction-Amalgamated Grain Boundary Tracking for Mapping 3D Crystallographic Orientation and Strain Fields during Plastic Deformation H. Toda [Acta Materials, Vol. 107(2016), pp. 310-324]
46 Effect of Yttrium on Pyramidal Slips in Magnesium Single Crystals S. Ando [Proceedings of The Ninth Pacific Rim International Conference on Advanced Materials and Processing(PRICM9), 2016, pp. 24-26]
47 Improvement of Corrosion Resistance of Aluminum Alloy with Wettability Controlled Porous Oxide Films M. Sakairi [Corrosion Science and Technology, Vol. 15, No. 4, 166(2016)]
48 Effects of Scandium and Zirconium Addition on Recrystallization Behavior of Al-Mg-Si Alloy K. Ikeda [Journal of The Japan Institute of Light Metals, Vol. 66, No. 11(2016), pp. 609-616]
49 Controllable Fabrication of Multi-Tiered Nanoporous Anodic TiO2-TiN Composite Films as High-Performance Anode Materials for Lithium-Ion Batteries S.-Z. Kure-Chu [Electrochimica Acta, Vol. 212, No. 1(2016), pp. 481-491]
50 Effects of Test Temperature and Environment on Fatigue Properties of a 6061 Aluminum Alloy A. Kurumada [Japan Institute of Light Metals, Vol. 67, No. 1(2017), pp. 2-7]
51 Fatigue Crack Growth Behavior and Susceptibility to Hydrogen Embrittlement in 2000 and 7000 Series Aluminum Alloys A. Kurumada [Japan Institute of Metals and Materials, Vol. 80, No. 12(2016), pp. 745-752]
52 Micromorphological Effect of Calcium Phosphate Coating on Compatibility of Magnesium Alloy with Osteoblast S. Hiromoto [Journal of Science and Technology of Advanced Materials, Vol. 18(2017), pp. 96-109]
53 Corrosion Behavior of Flame-Resistant Calcium-Added Magnesium Alloy in NaCl Aqueous Solution Containing Various Anion Species T. Ishizaki [Proceedings of EUROCORR 2016, WS B, 1-7(2016)]
54 Formation of Porous Al Particles by Anisotropic Anodic Etching T. Yanagishita [Electrochemistry Communications, 78(2017), 26-28]
55 Indirect Oxidation of Aluminum under an AC Electric Field H. Asoh [RSC Advances, Vol. 6, (2016), pp. 90318-90321]
56 Effect of Displacement Rate on Sharp Millimeter Indentation H. Yamada [Key Engineering Materials, ISSN:1662-9795, Vol. 715, pp. 111-115]
57 Effects of Particle Size on Fabrication of Al-TiO2 Functionally Graded Materials by Centrifugal Mixed-Powder Method H. Sato [Mater. Sci. Forum, Vol. 879, (2017), pp. 1691-1697]
58 Change in Mechanical Properties of Biomechanical Ti-12Cr Subjected to Heat Treatment and Surface Modification Processing T. Akahori [J. Japan Inst. Metals, Vol. 80, No. 12, (2016), pp. 764-771]
59 Construction of Finite Element Meshes for Polycrystal Grains Model from X-ray CT Images M. Kobayashi [Materials Transactions, Vol. 57, No. 12(2016), pp. 2089-2096]
60 Relationship between Internal Inhomogeneous Deformation and Local Misorientation in Aluminum Alloy Deformed by Plane Strain Compression M. Kobayashi [Journal of The Institute of Light Metals, Vol. 66, No. 11(2016), pp. 589-594]
61 Development of Microstructures in Rapidly-Quenched Mg85Y9Zn6 Alloy Ribbons during Heating at a Constant Speed Examined by Simultaneous Small- and Wide-Angle Scattering Measurements H. Okuda [Acta Materialia, Vol. 118(2016), pp. 95-99]
62 Fundamental Properties of Ti-6Al-4V Alloy Produced by Selective Laser Melting Method T. Morita [Materials Transactions, Vol. 58, No. 10 (2017), in printing.]
63 Tool Wear of Poly Crystalline Diamond in Cutting Ti-6Al-4V Alloy with High-Pressure Coolant Supplied T. Wada [Proceedings of 2017 8th International Conference on Mechanical and Aerospace Engineering]
64 Effect of a Trace of Sodium on the High Temperature Ductility of 5083 Aluminum Alloy K. Horikawa [Journal of Japan Institute of Light Metals, Vol. 66, No. 8(2016), pp. 426-431]
65 Filling of Surface Pores of Aluminum Foam with Polyamide by Selective Laser Melting for Improvement in Mechanical Properties R. Matsumoto [Journal of Materials Processing Technology, Vol. 237(2016), pp. 402-408]
66 Impact of Grain Shape on the Micromechanics-Based Extraction of Single-Crystalline Elastic Constants from Polycrystalline Samples with Crystallographic Texture M. Tane [Acta Materialia, Vol. 122(2017), pp. 236-251]
67 Crystallographic Texture Control of Beta-Type Ti-15Mo-5Zr-3Al Alloy by Selective Laser Melting for the Development of Novel Implants with a Biocompatible Low Young's Modulus T. Ishimoto [Scripta Materilia, Vol. 132(2017), pp. 34-38]
68 Effects of Solute Fe, Zn and Mn on Recrystallization in Aluminum Y. Takigawa [Materials Transactions, Vol. 57, No. 3 (2016), pp. 329-334]
69 Effect of Imposed Strain and Annealing Temperature on Uniform Elongation in A5052 Alloy Processed by Accumulative Roll Bonding K. Kashihara [Mechanical Engineering Journal, Vol. 3(2016), Paper No. 16-00139]
70 Phase Transformation Behavior of Ti-35Nb-7AI Alloy with Tempering Y. Takemoto [Journal of The Japan Institute of Metals and Materials, Vol. 80, No. 9(2016), pp. 547-552]
71 Microstructure of Ti-4Fe-7Al Alloy Quenched in a Salt Bath after Solution Treatment Y. Takemoto [Journal of The Japan Institute of Metals and Materials, Vol. 80, No. 11(2016), pp. 691-696]
72 Influence of Nb Content of Ti-xNb-7Al Alloys on β →α"Transformation with Tempering Y. Takemoto [Journal of The Japan Institute of Metals and Materials, Vol. 81, No. 7(2017), pp. 345-352]
73 High Strain-Rate Compressive Stress-Strain Characteristics of AA6061-T6 Friction Stir Welds in Through-Thickness Direction K. Nakai [Journal of Light Metal Welding, Vol. 54, No. 8 (2016), pp. 306-313]
74 Estimation of the Electrical Conductivity of TiB2/Al Composites by Using Image Analysis K. Sugio [Mechanical Engineering Journal, Vol. 3(2016), Paper No. 15-00577]
75 Effect of the Interfacial Thermal Resistance on the Effective Thermal Conductivity of Aluminum Matrix Composites K. Sugio [Materials Transactions, Vol. 57(2016), pp. 582-589]
76 Effect of Silicide on Dynamic Recrystallization in Near Alpha Titanium Alloy T. Sakamoto [Material Science Forum, Vols. 879(2017), pp. 1634-1638]