1 Growth of Barrier-type Anodic Films on Magnesium in Ethylene Glycol Electrolytes Containing Fluoride and Water H. Habazaki [Electrochimica Acta, 179(2015)402-410]
2 Formation of TiO2 Layers on Commercially Pure Ti and Ti-Mo and Ti-Nb Alloys by Two-step Thermal Oxidation and Their Photocatalytic Activity T. Narushima [Applied Surface Science, Vol. 357(2015), pp. 2198-2205]
3 Computer Experiments on Radiation Strength and Irradiation Enhanced Segregation of Al-Si Amorphous Alloys Y. Sasajima [Journal of the Japan Institute of Light Metals, Vol. 65. No. 8(2015), pp. 326-330]
4 Deformation and Plateau Region of Functionally Graded Aluminum Foam by Amount Combinations of Added Blowing Agent T. Utsunomiya [Materials, 8(10)(2015), pp. 7161-7168]
5 Drop Weight Impact Behavior of Functionally Graded Aluminum Foam Consisting of A1050 and A6061 Aluminum Alloys T. Utsunomiya [Materials Science and Engineering A, 639(2015), pp. 597-603]
6 Effect of Deformation Condition on Microstructure and Mechanical Properties of Aluminum Alloy Tube in Cyclic Rotating Bending Process K. Manabe [Advances in Engineering Research, Vol. 32(2015), pp. 1092-1095]
7 Polymer Lenses with Antireflection Structures Prepared Using Anodic Porous Alumina Molds H. Masuda [J. Vac. Sci. Technol. B, Vol. 34, No. 2, Mar/Apr (2016)]
8 Microstructural Evolution through Uniaxial Hot Pressing before Age Hardening of AZ91D Alloy K. Kitazono [Materials Transactions, Vol. 57, No. 7(2016), pp. 1094-1100]
9 Direct Observation of Two-dimensional Grain Boundary Sliding and Switching in ODS Ferritic Steel E. Sato [Materials Science Forum, 838-839(2015), 43-50]
10 Three Strategies to Achieve Concurrent Strengthening by Ultrafine-grained and Precipitation Hardenings for Severely Deformed Age-hardenable Aluminum Alloys S. Hirosawa [Advanced Materials in Aerospace Engineering, Trans Tech Publications, (2016), pp. 161-166]
11 Surface Modification of Carbon Steel by Atmospheric-controlled IH-FPP Treatment Using Mixed Chromium and High-speed Steel Particles J. Komotori [Published in Materials Transactions, Vol. 57, No. 10(2016) pp. 1801 to 1806]
12 Deformation Behavior of Press Formed Shell by Indentation and its Numerical Simulation M. Yamashita [Journal of Engineering, Vol. 2015, Article ID 453931, 11pages]
13 Aluminum/ Cubic Boron Nitride Functionally Graded Grinding Wheel for Drilling CFRP Fabricated by the Centrifugal Mixed-Powder Method Y. Watanabe [Full Paper of 20th International Conference on Composite Materials, Program no. 3301-2(12 pages)(2015)]
14 Fabrication of Novel Al-L12-Type Al2.7Fe0.3Ti Refiners by Spark Plasma Sintering and Their Refining Performance Y. Watanabe [Jpn J. Appl. Phys, 55, No. 1, 01AG01(10 pages)(2016)]
15 Aluminum Matrix Texture in Al-Al3 Ti Functionally Graded Materials Analyzed by Electron Back-Scattering Diffraction Y. Watanabe [Jpn J. Appl. Phys, 55, No. 1, 01AG03(7 pages)(2016)]
16 Fabrication of Fe-Mn-Si-Cr Shape Memory Alloy Fiber/ Aluminum Matrix Smart Composite by Casting Y. Watanabe [Materials Transactions, 57, No. 5, 560-599(2016)]
17 Thermoelectric Properties of Al-Mn-Si Based C54 Phase Containing Small Amount of C40 Phase T. Takeuchi [Materials Transactions, doi:10.2320/matertrans.MF201613]
18 Effect of Pre-Compressive Strain on Work-Hardening Behavior upon Two-Step Loading in a Magnesium Alloy Sheet H. Takuda [Key Engineering Materials, 639(2015), 347-352]
19 Effect of Segregated Elements on the Interactions between Twin Boundaries and Screw Dislocations in Mg M. Mabuchi [Journal of Applied Physics, Vol. 118, (2015), pp. 034304(1)-12]
20 Effects of Thermal History on the Interface of A3003/SUS304 FSWed Lap Joints A. Hirose [Journal of Light Metal Welding, Vol. 53(2015), pp. 510-515]
21 State of The Art PM Ti Materials with Ubiquitous Light Elements K. Kondoh [Proceedings of PM Titanium 2015, The 3rd Conference on Powder Processing, Consolidation and Metallurgy Titanium]
22 Die Motion Control for Die-Quench Forging Process of AA6061 Aluminum Alloys H. Utsunomiya [CIRP Annals–Manufacturing Technology, Vol. 79, No. 1(2016), pp. 297-300]
23 Development of Single Crystalline Bone Plate with Low Elastic Modulus Using Beta-type Ti-15Mo-5Zr-3Al Alloy T. Nakano [Tetsu to Hagane, Vol. 101(2016), 501-505]
24 Effect of Alloying Element X on Transformation Strains and Phase Stabilities between α" and β Ti-Nb-X (X=Al, Sn, Zr, Ta) Ternary Alloys from First-Principles Calculations K. Higashi [Materials Transactions, Vol. 57, No. 3(2016), pp. 263-268]
25 Effect of Aluminum or Zinc Solute Addition on Enhancing Impact Fracture Toughness in Mg-Ca Alloys T. Mukai [Acta Materialia, Vol. 104(2016), pp. 283-294]
26 Formability of Titanium/Steel/Titanium Sheet in Multistage Deep Drawing Y. Harada [Proceedings of Asia Steel 2015, 2015, pp. 650-651]
27 Surface Modification of Magnesium Alloy by Shot Lining Heat Treatment Y. Harada [Proceedings of the 24th International Symposium on Processing and Fabrication of Advanced Materials, Vol. 24, 2015, pp. 352-357]
28 Square Cup Deep Drawing of Pure Titanium Sheet Y. Harada [Proceedings of Asia Steel 2015, 2015, pp. 652-653]
29 In -Situ Synthesis of Al-based Composites Reinforced with TiB2-TiC-Al2O3 Ceramic Particulates Z. -C. Chen [Journal of Sustainable Research in Engineering, Vol. 2, No. 2(2015), pp. 45-52]
30 Reduction of Large Vacancy Clusters in Nearly Perfect Aluminum Single Crystals K. Mizuno [Transaction of the Materials Research Society of Japan, Vol. 41, No. 3(2016)]
31 Nickel Formation on Graphite Sheet Surface for Improving Wettability with Magnesium Alloy G. Sasaki [Materials Transactions 56, 10(2015), pp. 83-87]
32 Development of Mechanical-electrochemical Cavitation Technology T. Yoshimura [Journal of Jet Flow Engineering, the Water Jet Technology Society of Japan, Vol. 32, No. 1(2016), pp. 10-17]
33 Age Hardening and Thermal Stability of Al-Cu Alloy Processed by High-pressure Torsion Z. Horita [Materials Science and Engineering A, 627(2015), pp. 111-118]
34 Aging Behavior of Al 6061 Alloy Processed by High-pressure Torsion and Subsequent Aging Z. Horita [Metallurgical Materials Transactions A, 46(2015), pp. 2664-2673]
35 Age Hardening in Ultrafine-grained Al-2%Fe Alloy Processed by High-pressure Torsion Z. Horita [Metallurgical Materials Transactions A, 46(2015), pp. 2614-2624]
36 Ultrafine-Grained Magnesium-Lithium Alloy Processed by High-pressure Torsion: Low-temperature Superplasticity and Potential for Hydroforming Z. Horita [Materials Science and Engineering A, 640(2015), pp. 443-448]
37 High Strength and Electrical Conductivity of Al-Fe Alloys Produced by Synergistic Combination of High-Pressure Torsion and Aging Z. Horita [Advanced Engineering Materials, 17(2015), pp. 1792-1803]
38 High-Pressure Sliding Using Rod Samples for Grain Refinement and Superplasticity in Al and Mg Alloys Z. Horita [Letters on Materials, 5(2015), pp. 258-263]
39 Achieving Superplasticity through Grain Refinement of A2024 Alloy Using High-Pressure Sliding Z. Horita [Journal of The Japan Institute of Light Metals, 65(8)(2015), pp. 319-325]
40 Diffraction-amalgamated Grain Boundary tracking for Mapping 3D Crystallographic Orientation and Strain Field during Plastic Deformation H. Toda [Acta Materialia, Vol. 107(2016), pp. 310-324]
41 Orientation Dependence of Bending Deformation Behavior in Magnesium Single Crystals S. Ando [J. Japan Inst. Met. Mater., Vol. 80, No. 1(2016), pp. 102-107 and Materials Transactions, Vol. 57, No. 8(2016), pp. 1246-1251]
42 Activation Stress for Slip Systems Pure Magnesium Single Crystals in Pure Shear Test S. Ando [J. Japan Inst. Met. Mater., Vol. 80, No. 5(2016), pp. 334-339]
43 Formation of Oxide Films for High-capacitance Aluminum Electrolytic Capacitor by Liquid Phase Deposition and Anodizing M. Sakairi [Surface and Interface Analysis, 48, 899-905(2016)]
44 Wear and Friction Characteristics of AlN/Diamond-like Carbon Hybrid Coatings on Aluminum Alloy M. Nakamura [Journal of Materials Engineering and Performance, Vol. 24, No. 10(2015), pp. 3789-3797]
45 Ab Initio Calculation Study on the Site of Hydrogen in Al-Zn-Mg Alloys T. Nagano [KEIKINZOKU, Vol. 66, No. 7(2016), pp. 1-6]
46 Self-healing Property of Hydroxyapatite and Octacalcium Phosphate Coatings on Pure Magnesium and Magnesium Alloy S. Hiromoto [Journal of Corrosion Science, Vol. 100(2015), pp. 284-294]
47 Evaluation of Microstructures of Hot-Rolled Mg-La-Zr Alloys Y. Tamura [J. Jpn. Soc. Technol. Plast., Vol. 661(2016-2), pp. 140-145]
48 Structure of a Novel Mg-rich Complex Compound in Mg-Co-Y Ternary Alloys E. Abe [Scripta Materialia, Vol. 98(2015), pp. 64-67]
49 Sintering Behavior and Mechanical Properties of Magnesium/β-Tricalcium Phosphate Composites Sintered by Spark Plasma Sintering E. Kobayashi [To be published in Materials Transactions, Vol. 57, No. 9, 2016]
50 Torsion Fatigue Properties of Circumferentially Notched Bars of Titanium Alloy N. Hisamori [Processing and Fabrication of Advanced Materials- XXIV, Vol. 24, 2015, pp. 385-393]
51 Role of Aluminide Coating on Oxidation Resistance of Ni-Based Single Crystal Superalloy at 900°C K. Kakehi [Int. J. Electrochem. Sci., 10(2015), 1873-1882]
52 High-Throughput Fabrication Process for Highly Ordered Through-Hole Porous Alumina Membranes Using Two-Layer Anodization T. Yanagishita [Electrochimica Acta, 184, (2015), 80-85]
53 Creep Deformation Mechanism and Dislocation Substructures in Low Stacking Fault Energy Type Mg-Y-Zn Dilute Solid Solution Alloys M. Suzuki [Accepted in Proceedings of The Ninth Pacific Rim International Conference on Advanced Materials and Processing (PRICM9), 2016]
54 Characterization of the Hydroxyapatite Layer Formed by Fine Particle Peening and Its Effect on the Fatigue Properties of Commercially Pure Titanium under Four-point Bending T. Akahori [Surface & Coating Technology, Vol. 288, No. 4(2016), pp. 196-202]
55 Non-destructive and Three-dimensional Measurement of Local Strain Development during Tensile Deformation in an Aluminum Alloy M. Kobayashi [IOP Conf. Series: Materials Science and Engineering 89(2015)012030 doi:10.1088/1757-899X/89/1/012030]
56 Fundamental FEM Analysis on Tensile Deformation of the Sheet Metal Embossed on Both Sides of the Plane T. Iizuka [Proceedings of the XIII International Conference on Computational Plasticity: fundamentals and Applications, (2015), pp. 78-84]
57 Variation of Apparent Mechanical Anisotropy of Cold-formed Embossed Sheet by Annealing T. Iizuka [Proceedings of ESAFORM2016, Paper No. 34(USB), 5 pages(Proceeded in AIP Conference Proceedings of ESAFORM2016]
58 Enhanced Age Hardening in an Al-Mg-Si Alloy Using High-speed Compression K. Horikawa [Materials Transactions, Vol. 56, (2015), pp. 1058-1062]
59 Crystal-orientation-dependent Corrosion Behaviour of Single Crystals of a Pure Mg and Mg-Al and Mg-Cu Solid Solutions K. Hagihara [Corrosion Science, Vol. 109, (2016), pp. 68-85]
60 Elastic-modulus Enhancement during Room-temperature Aging and Its Suppression in Metastable Ti-Nb-Based Alloys with Low Body-centered Cubic Phase Stability M. Tane [Acta Materialia, Vol. 102(2016), pp. 373-384]
61 Effect of Solute Elements on Grain Refinement during Friction Stir Processing in High-purity Aluminum Y. Takigawa [Materials Science Forum, Vols. 838-839(2016), pp. 116-121]
62 Soft X-ray XAFS Studies on Al-Mg-Si Alloys with Different Aging Conditions H. Adachi [Journal of the Japan Institute of Light Metals, Vol. 65, No. 9(2015), pp. 411-415]
63 Phase Transformation Behavior of Ti-10Mo-7Al Alloy with Heat Treatment Y. Takemoto [Journal of The Japan Institute of Metals and Materials, Vol. 79, No. 9(2015), pp. 468-473]
64 Change in Structure and Mechanical Properties of Ti-10Mo-7Al by Heat Treatments Y. Takemoto [Proceedings of PFAM XXIV, December, 2015]
65 Optimum Exploration for the Self-Ordering of Anodic Porous Alumina Formed via Selenic Acid Anodizing T. Kikuchi [Journal of The Electrochemical Society, 162(2015)E244-250]
66 Self-ordered Porous Alumina Fabricated via Phosphonic Acid Anodizing T. Kikuchi Electrochimica Acta, 190(2016), 471-479]
67 Exploration for the Self-ordering of porous Alumina Fabricated via Anodizing in Etidronic Acid T. Kikuchi [Electrochimica Acta, 211(2016), 515-523]
68 Superhydrophilicity of a Nanofiber-covered Aluminum Surface Fabricated via Phyrophosphoric Acid Anodizing T. Kikuchi [Applied Surface Science, 389(2016), 173-180]
69 Fabrication of Self-ordered Porous Alumina via Anodizing in Sulfate Solutions T. Kikuchi [Materials Letters, 183(2016), 285-289]
70 Fabrication of High-quality Wrought Product-grade cast Aluminum Alloys by High-speed Twin-roll Casting S. Kumai [Journal of Japan Foundry Engineering Society, Vol. 87, No. 11(2015), pp. 772-781]
71 Microstructural Characterization of Aluminum Alloys Using Week's Reagent, part II: Coloring Mechanism S. Kumai [Materials Characterization, Vol. 107(2015), pp. 434-452]
72 Numerical Simulation of Joining Process and Joint Interface Morphology in Explosive Welded Cu/Al Lap Joints S. Kumai [Journal of Smart Processing, Vol. 4, No. 2(2015), pp. 95-101]
73 Correlation between Amount of Bound Water and Stability of Passive Film on Ti during Passivation Time in Sulfuric Acid Solution T. Haruna [The Journal of Solid State Electrochemistry, Vol. 19, No. 12(2015), pp. 3589-3593]
74 Correlation between Bound Water and Stability of Anodic Oxide Film on Aluminum T. Haruna [Mater. Trans., Vol. 56, No. 12(2015), pp. 2000-2005]