1 Improvement of Al coating adhesive strength on the AZ91D magnesium alloy electrodeposited from ionic liquid K. Azumi [Surface & Coatings Technology 208 (2012) 1-6]
2 Photo-induced properties of non-annealed anatase TiO2 mesoporous film prepared by anodizing in the hot phosphate/ glycerol electrolyte H. Habazaki [Applied Surface Science 258(2012)9810-9815]
3 Production of Nb-Ti-Ni alloy in molten CaCl2 R. O. Suzuki [Electrochimica Acta, Vol. 100(2013), 257-260]
4 Formation of anatase on commercially pure Ti by two-step thermal oxidation using N2-CO gas T. Narushima [Materials Transactions, Vol. 54, No. 8(2013), pp. 1302-1307]
5 Effects of magnesium addition on threshold stress of Al-Mn alloys G. Itoh [Journal of Light Metal Welding, Vol. 62, No. 8(2012), pp. 300-305]
6 Effects of processing parameters of multipass friction stir processing on microstructure and hardness of 7075 aluminum alloy G. Itoh [Journal of Light Metal, Vol. 63(2013), No. 1, p. 2-7]
7 Friction stir welding in aluminum alloy foils Y. Takayama [Journal of Light Metal Welding, Vol. 50, No. 5(2012), pp. 177-182
8 Microstructure and texture evolution in titanium subject to friction roll surface processing and subsequent annealing Y. Takayama [Tarns. Nonferrous Met. Soc. China, Vol. 22, No. 11(2012), pp. 2616-2627]
9 Texture evolution in titanium and aluminum sheets subjected to friction roll surface processing and subsequent annealing Y. Takayama [Materials Science Forum, Vols. 702-703, (2012), pp. 457-460]
10 Electrochemical corrosion and bioactivity of titanium-hydroxyapatite composites prepared by spark plasma sintering M. Kubota [Corrosion Science, Vol. 70(2013), pp. 212-220]
11 Fabrication of ADC12 porous aluminum with graded porosities and pore structures T. Utsunomiya [Journal of the Japan Institute of Light Metals, Vol. 62, No. 7(2012), pp. 278-284 ]
12 Compression properties of Al/Al-Si-Cu alloy functionally graded aluminum foam fabricated by friction stir processing route T. Utsunomiya [Materials Transactions, Vol. 54, No. 3(2013), pp. 405-408]
13 Structural vacancies of Al-based quasicrystals and anomalous transport property: Positron annihilation studies K. Kimura [Physics Procedia, Vol. 35(2012), pp. 51-56]
14 Effect of mechanical properties and morphological change of eutectic Si phase of rapidly cooled Al-11%Si-2.5%Cu alloy S. Kumai [Journal of Japan Foundry Engineering Society, Vol. 85, No. 6(2013), pp. 335-342]
15 Analysis of microstructure evolution and precise solid fraction evaluation of A356 aluminum alloy during partial re-melting by a color etching method S. Kumai [Journal of Materials Science, Vol. 47, Issue 18(2012), pp. 6553-6564]
16 New low-temperature creep mechanism in face-centered cubic metals E. Sato [The Proceedings of 12th International Conference on Creep and Fracture of Engineering Materials and Structures (CREEP 2012), May 27-31, 2012, Kyoto]
17 Effect of Mn or Fe addition on age-hardening behavior of Al-Mg2Si alloys K. Matsuda Materials Transactions ,Vol. 53, No. 8(2012), pp. 1521-1528
18 Cavitation during high temperature deformation in Al-Mg alloys H. Toda [Acta Materialia, Vol. 61(2013), pp. 2403-2413]
19 Precipitation refinement and mechanical property of Al-Fe alloy by compressive torsion processing N. Kanetake [Journal of Japan Society for Technology of Plasticity, Vol. 54, No. 625(2013), pp. 175-180]
20 Mechanical property of hypereutectic Al-Si alloy applied compressive torsion processing N. Kanetake [Journal of Japan Institute of Light Metals, Vol. 63, No. 5(2013), pp. 182-187]
21 Crystal plasticity finite-element simulation of deformation behavior in a magnesium alloy sheet considering detwinning H. Takuda [Steel Research International, Special Edition, (2012), 1115-1118]
22 Numerical analysis of interfacial deformation and temperature rise during ultrasonic Al ribbon bounding Y. Takahashi [Journal of Physics CS, Vol. 379(2012), 012028]
23 High-temperature oxidation and its kinetics study of Ti-Al and Ti-V alloys in air Y. Minamino [J. Japan Light Metals, Vol. 63, No. 2(2013), pp. 41-48]
24 Microscale evaluation of mechanical properties of friction stir welded A6061 aluminum alloy/304 stainless steel dissimilar lap joint A. Hirose [Science and technology of Welding and joining, Vol. 18(2013), pp. 108-113]
25 β-phase instability in binary Ti-xNb biomaterial single crystals T. Nakano [Materials Transactions, Vol. 54, No. 2(2013), pp. 156 to 160]
26 Segregation of alkali and alkaline earth metals at Σ11(113)[110]grain boundary in aluminum from first-principle calculations K. Higashi [Materials Transactions, Vol. 53(2012), pp. 1699-1705]
27 Sintering and electrochemical properties of hydrogen storage alloys in the system Mg-Ni T. Esaka [Solid State Phenomena, Vol. 194, (2013), pp. 245-248]
28 Constitutive modeling of mechanical behavior friction stir welded AA2024-T3 butt joints: In plane tension tests and through-thickness compression tests T. Yokoyama [Journal of Light Metal Welding, Vol. 50, No. 10, (2012), pp. 395-402]
29 Aged-hardening of an Al-Li-Cu-Mg alloy (2091) processed by high-pressure torsion Z. Horita [Materials Science and Engineering A, 546(2012), pp. 82-89]
30 Powder consolidation of Al-10wt% Fe alloy by high-pressure torsion Z. Horita [Materials Science and Engineering A, 558(2012), pp. 462-471]
31 Ultrahigh strength and high plasticity in TiAl intermetallics with bimodal grain structure and nanotwins Z. Horita [Scripta Materialia, 67(2012), pp. 814-817]
32 Mechanical properties and microstructures of Al-Fe alloys processed by high-pressure torsion Z. Horita [Metallurgical and Materials Transactions A, 43(2012), pp. 5182-5192]
33 Effects of ball milling and high-pressure torsion for improving mechanical properties of Al-Al2O3 nanocomposites Z. Horita [J Mater Sci, 47(2012), pp. 7821-7827]
34 Precipitation morphology in Al-Mg-Si-Sc-Zr hot-rolled sheet H. Nakashima [Proceedings of 13th International Conference on Aluminum Alloys(ICAA13), (2012), pp. 1181-1185]
35 Precipitation morphology and tensile properties of Al-0.62Mg-0.32Si alloy aged at low temperature H. Nakashima [Proceedings of 13th International Conference on Aluminum Alloys(ICAA13), (2012), pp. 1229-1234]
36 Strength of aluminum sheets with various configurations in cross section M. Furukawa [Journal of the Japan Society of Technology Education in Kyushu Branch, Vol. 20(2012), pp. 1-5]
37 Orientation dependence of fatigue behavior in magnesium single crystals S. Ando [Conference Proceedings of International Conference on Magnesium alloys and their Applications, ICMAA2012, 499-503(2012)
38 Crack orientation dependence of fatigue in titanium single crystals S. Ando [proceedings of the 12th World Conference on Titanium, Ti-2011, 1285-1289(2012)]
39 Semi-solid forming of Al-Si functionally graded material and refinement of Si particles Y. Fukui [Trans. JSME, Vol. 786, No. 795(2012), pp. 1575-1582],
40 Effect of strain rate on compressive properties in P/M Al-Zn-Mg-Cu alloy N. Ogasawara [Proceedings of 7th International Symposium on Advanced Science and Technology in Experimental Mechanics, 2012]
41 Formation of alumina films with nano-dot structures by successive liquid phase deposition, anodizing, and substrate dissolution M. Sakairi [Surface and Interface Analysis, February 2013, DOI 10.1002/sia.5233]
42 Internal and residual stresses in high temperature deformation of solid solutions H. Sato [Ninth International Conference on Residual Stresses, ICRS9(2012), pp. 149]
43 Chemical and crystallographic characterizations of hydroxyapatite- and octacalcium phosphate coatings on magnesium synthesized by chemical solution deposition using XPS and XRD S. Hiromoto [Surface and Coatings Technology, Vol. 218, (2013), pp. 114-118]
44 Study on mold filling of molten aluminum alloy in expendable pattern casting process S. Koroyasu [Transactions of the 5th International Congress on Lost Foam Casting Technology in China, (2012), pp. 11-19]
45 Fabrication of porous aluminum alloy with aligned unidirectional pores by dipping of pipes in base metal melt S. Suzuki [Materials Transactions, Vol. 53, No. 10(2012), pp. 1790-1794]
46 Effect of ageing on microstructure and mechanical properties of a multi-directionally forged Mg-6Al-1Zn alloy H. Miura Materials Science & Engineering A, Vol. 563(2013), pp. 53-59
47 Enhanced plastic deformation of magnesium alloy produce through accumulative diffusion bonding K. Kitazono [Mater. Sci. Forum, Vol. 735, (2013), pp. 87-92]
48 The metastable phase responsible for hardening in an Al-Mg alloy aged at 473 K M. Takeda [Advanced Materials Research, Vol. 748(2013), pp. 123-127]
49 Methods for designing concurrently strengthened severely deformed age-hardenable aluminum alloys by ultrafine-grained and precipitation hardenings S. Hirosawa Metallurgical and materials Transactions A, 44A(2013), pp. 3921-3933
50 Local reinforcement of 6061 aluminum alloy bar using high-frequency induction heating apparatus Y. Nakayama [Materials Transactions, Vol. 53, No. 9, pp. 1604-1610(2012)]
51 Surface hardening of titanium using gas nitriding M. Yoshida [International Journal of Precision Engineering and Manufacturing, Vol. 14, (6) (2013), pp. 971-976]
52 Nucleation and growth of GP(1) zones and growth of θ” and θ’ phases in an Al-4mass%Cu single crystal under applied stress C. Watanabe [Journal of the Japan institute of light metals, Vol. 62, No. 12(2012), pp. 479-485]
53 Mechanical properties and biocompatibility of low coat-type Ti-Mn system binary alloys for biomedical applications T. Akahori [J. Japan Inst. Metals, Vol. 77, No. 7, (2013), pp. 253-258]
54 Dynamic crush behavior of adhesive-bonded aluminum tubular structure — Experiment and numerical simulation — M. Yamashita [Thin-Walled Structures, Vol. 69(2013), 45-53]
55 Effects of short-time solution treatment on cold workability of Ti-6Al-4V alloy T. Morita [Materials Transactions, Vol. 53, No. 1(2012), pp. 173-178]
56 Surface Modification of 6061 Aluminum alloy using plasma-based ion implantation and deposition T. Wada [Advanced Science letters, Vol. 19, No. 8(2013), pp. 2317-2321(]
57 Suppression of grain boundary embrittlement of Al-5% Mg alloy by immersion in liquid indium K. Horikawa [Scripta Materialia, Vol. 67, (2012), pp. 712-715]
58 Texture evolution in {112} <111> aluminum single crystals processed by severe plastic deformation K. Kashihara [Materials Characterization, Vol. 75, (2013), pp. 129-137]
59 Bondability of dissimilar metal sheets by shot peening Y. Harada [Proceedings of 15th International Conference on AMPT 2012, No. 11732(2012)]
60 Preparation and characterization of microporous layers on titanium by anodization in sulfuric acid with and without hydrogen charging S. Tanaka [ACS Applied Materials & Interfaces, Vol. 5, No. 8(2013), pp. 3340-3347]
61 Hydrogen evolution reaction and its analysis on aluminum in sulfuric acid O. Seri [J. Japan Inst. Metals, Vol. 63, No. 3(2013), pp. 95-100]