| 1 |
Fabrication of a Three-dimensional Micro-manipulator by Laser Irradiation and Electrochemical Techniques and the Effect of Electrolytes on Its Performance |
H. Takahashi |
[Electrochim. Acta, 52 (2007) 4480-4486] |
| 2 |
Effect of Surface Pretreatment by Acid Picking on the Density of Stannate Conversion Coatings Formed on AZ91 D Magnesium Alloy |
H. Konno |
[Surface and Coatings Technology, 202(2007)532-537] |
| 3 |
Spark Anodizing of  -Ti Alloy for Wear-Resistant Coating |
H. Konno |
[Surface & Coatings Technology 201(2007)8730-8737] |
| 4 |
Effect of EDTA on Corrosion Behavior of Industria0lly Pure Aluminum Alloy 1100 |
O. Seri |
[J. Light Japan Inst. Metals, vol. 56, No. 8, (2006), pp. 435-440] |
| 5 |
Phase-field Simulation of Dragging of Liquid Bi Particles during the Thermally Activated Migration of Grain Boundaries in the Al-Bi System |
K. Ishida |
[Scripta Materialia, 56, (2007), pp. 433-436] |
| 6 |
Microstructural Refinement Mechanism by Controlling Heating Process in Multiphase Materials with Particular Reference to  -TiAl |
K. Maruyama |
[Applied Physics Letters, Vol. 88(2006), pp. 131908 1-3] |
| 7 |
Bioactive Ceramic Surface Modification of -Type Ti-Nb-Ta-Zr System Alloy by Alkali Solution Treatment |
M. Niinomi |
[Mater. Trans., JIM, Vol. 48, No. 3(2007), pp. 293-300 ] |
| 8 |
Bioactive Surface Modification of Newly Developed -Type Titanium Alloy for Biomedical Applications by Electrochemical Treatment |
M. Niinomi |
[Japan Inst. Metals, Vol. 70, No. 4(2006), pp. 304-313] |
| 9 |
Analysis of Tensile Deformation Behavior of Ti-XNb-10Ta-5Zr Alloys for Biomedical Applications |
M. Niinomi |
[Japan Inst. Metals, Vol. 70, No. 7(2006), pp. 572-578] |
| 10 |
Effect of Aging Treatment on Mechanical Properties of -Type Ti Alloy for Biomedical Applications |
M. Niinomi |
[Japan Inst. Metals, Vol. 70, No. 4(2006), pp. 295-303] |
| 11 |
Corrosion Behavior during Cyclic Salt Spray Test of Friction Stir Welded A7075 and A6N01 Aluminum Alloys |
Y. Motohashi |
[J. Japan Inst. Metals, Vol. 70, No. 1(2006), pp. 96 to 105] |
| 12 |
Grain Growth Behaviors in a Friction-Stir-Welded ZK60 Magnesium Alloy |
Y. Motohashi |
[Materials Transactions, vol. 48, No. 6(2007), pp. 1387 to 1395] |
| 13 |
Hydrogen absorption Behavior in Al-Mg Alloys Exposed to an SO2 Atmosphere during Subsequent Annealing |
G. Itoh |
[The Journal of Japan Institute of Light Metals, Vol. 57, No. 5(2007), pp. 203-209] |
| 14 |
Effect of Alloying Elements on the Change of Hydrogen Content in Al-4%Mg Alloys during Annealing |
G. Itoh |
[The Journal of Japan Institute of Light Metals, Vol. 56, No. 8(2006), pp. 423-428] |
| 15 |
Behavior of Environmental Hydrogen in High-magnesium Al-Mg Alloys Analyzed by Hydrogen Microprint Technique |
G. Itoh |
[The Journal of Japan Institute of Light Metals, Vol. 56, No. 9(2006), pp. 478-482] |
| 16 |
Influence of an Inclined Cooling Plate on the Production of A356/CNF and A356/SiC MMC by Compocasting |
T. Motegi |
[Materials Science Forum Vols. 519-521, July (2006), pp. 609-614] |
| 17 |
Environmental Embrittlement in Air of Al-Zn-Mg-Cu Alloys with Chromium or Zirconium |
M. Kanno |
[J. Japan Inst. Light Metals, Vol. 57, No. 1(2007), pp. 19-24] |
| 18 |
Estimation of Fatigue Life in Aluminum Alloy Die Castings with Artificial Defect |
K. Kanazawa |
[J. JFS, Vol. 79, No. 2(2007), pp. 90-94] |
| 19 |
Microstructures and Mechanical Properties of Lap Friction Seam Welded 5052 Aluminum Alloy |
K. Katoh |
[Journal of Light Metal Welding & Construction, Vol. 45, No. 1(2007), pp. 14-22] |
| 20 |
Deep Drawability of Magnesium Alloy Sheets Manufactured by Twin Roll Caster |
N. Koga |
[Journal of Japan Institute of Light Metals, Vol. 57, No. 4(2007), pp. 141-145] |
|
| 21 |
Determination of the R-Line Luminescence Spatial Resolution of a Near-Field Optical Spectroscopy System for Piezospectroscopy |
Y. Kagawa |
[Journal of Applied Physics, Vol. 101, (2007), p. 123527] |
| 22 |
Improvement of Thermoelectric Properties of Icosahedral AlPdRe Quasicrystals by Fe Substitution for Re |
K. Kimura |
[Journal of Applied Physics, Vol. 101, No. 5,(2007), pp. 103702-1-4] |
| 23 |
DC Etching of Aluminum Foils Using Self-Organized Materials as a Direct Mask |
S. Ono |
[ATB Metallurgie, Vol. 45,(2006), pp. 480-483] |
| 24 |
Application of Self-Organized Anodic Alumina and Colloidal Crystals to Nanofabrication |
S. Ono |
[ATB Metallurgie, Vol. 45,(2006), pp. 120-125] |
| 25 |
Fabrication of Ordered Nanostructure on Silicon Substrate Using Localized Anodization and Chemical Etching |
S. Ono |
[Electrochemistry, Vol. 74, No. 5(2006), pp. 379-384] |
| 26 |
Superplasticity of Fine-Grained Magnesium Alloy AZ31 Processed by Multi-Directional Forging |
T. Sakai |
[Materials Transactions, 48(2007), pp. 1406 to 1411] |
| 27 |
Extrusion of Tube with Holed Rib |
M. Murata |
[Journal of Materials Processing Technology Vol. 48, No. 554, (2007)234-238] |
| 28 |
Grain Refinement by Severe Deformation Processing and Superplastic Characterization of AZ31 Magnesium Alloy Tubes |
K. Manabe |
[Journal of the Japan Society for Technology of Plasticity, Vol. 48, No. 556(2007-5), pp. 412-416] |
| 29 |
Effect of Temperature and Drawing Speed on Warm Deep Drawing Characteristics of AZ31 Magnesium Alloy Sheet |
K. Manabe |
[Journal of Japan Institute of Light Metals, Vol. 56, No. 10(2006), pp. 521-526] |
| 30 |
Fabrication of Superplastic Microtubes Using Dieless Drawing Process |
K. Manabe |
[Journal of the Japan Society for Technology of Plasticity, Vol. 47, No. 548(2006), pp. 870-874] |
| 31 |
Finite Element Simulation with Coupled Thermo-Mechanical Analysis of Superplastic Dieless Tubes Drawing Considering Strain Rate Sensitivity |
K. Manabe |
[Journal of the Japan Society for Technology of Plasticity, Vol. 48, No. 552(2007), pp. 51-55] |
| 32 |
Control of Pitting Sites on Al Using Patterned Masking Film |
H. Masuda |
[Electrochemical and Solid-State Letters, Vol. 9, No. 9, B39-B41(2006)] |
| 33 |
Effects of Plastic Strain on Surface Roughness and Coefficient of Friction in Tension-Bending Test |
A. Azushima |
[Annals of the CIRP. Vol. 55/1(2006), pp. 303-306] |
| 34 |
Boss Forming, An Environment-Friendly Rotary Forming |
K. Kawai |
[Key Engineering Materials, Vol. 344(2007), pp. 947-953] |
| 35 |
Microstructure Evolution and Texture Development during High-Temperature Uniaxial Compression of Magnesium Alloy AZ31 |
H. Fukutomi |
[Materials Science and Engineering 430(2006), pp. 98-103] |
| 36 |
Anisotropic Compressive Behavior of Al-Mg Alloy Foams Manufactured through Accumulative Roll-Bonding Process |
K. Kuribayashi |
[Materials Letters, Vol. 61, No. 8-9(2007), pp. 1771-1774] |
| 37 |
Influence of Preliminary Extrusion Conditions on the Superplastic Properties of a Magnesium Alloy Processed by ECAP |
H. Anada |
[Acta Materialia, Vol. 55, (2007), pp. 1083-1091] |
| 38 |
HRTEM Observation of Precipitates in Al-Mg-Ge Alloy |
S. Ikeno |
[Journal of Japan Institute of Light Metals, Vol. 56, No. 11(2006), pp. 680-684] |
| 39 |
The Morphology of Spinels and Al2O3 Particles in an Al2O3/Al-Mg-Si Composite Material Revealed by Scanning Low Energy Electron Microscopy |
S. Ikeno |
[Materials Transactions, Vol. 47, No. 7, (2006), pp. 1815-1820] |
| 40 |
Experimental and Numerical Investigations of the Effects of the Spatial Distribution of Alpha-phase on Fracture Behavior in Hypoeutectic Al-Si Alloys |
H. Toda |
[Acta Materialia, Vol. 54, (2006), pp. 4881-4893] |
|
| 41 |
Measurement of 3-D Strain Distribution by Means of High-Resolution X-ray CT Image and Tracking of Microstructural Features |
H. Toda |
[J. Japan Inst Metals, Vol. 71, No. 2(2007), pp. 181-186] |
| 42 |
Foaming and Filling-in Behavior of Porous Aluminum in Hollow Components |
N. Kanetake |
[Materials Transactions, Vol. 47, No. 9(2006), pp. 2178-2182] |
| 43 |
Producing Technology of Aluminum Foam from Machined Chip Waste |
N. Kanetake |
[Materials Transactions, Vol. 47, No. 9(2006), pp. 2125-2130] |
| 44 |
Microstructure Refinement of Al-Si Alloy Using Compressive Torsion Processing |
N. Kanetake |
[Materials Science Forum, Vols. 519-521(2006), pp. 1441-1446] |
| 45 |
Formation and Osteoinductivity of Titania/ Hydroxyapatite Composite Films by Pulse Electrolysis |
M. Okido |
[Mater. Trans., Vol. 48, No. 3(2007), pp. 328-331] |
| 46 |
Characteristics of a Near-Net-Shape Formed Al-Al3Fe Eco-Functionally Graded Material Produced over Its Eutectic Melting Temperature |
Y. Watanabe |
[Materials Science and Engineering A 416, 80-91(2006)] |
| 47 |
Grain Refining Performance for Al and Al-Si Alloy Casts by Addition of Equal-Channel Angular Pressed Al-5mass% Ti Alloy |
Y. Watanabe |
[Materials Science and Engineering A 425, 55-63(2006)] |
| 48 |
Grain Refinement Performance of Aluminum Cast-Alloy by Deformed Al-Al3Ti Alloy Refiner |
Y. Watanabe |
[Materials Science Forum, 519-521, 1859-1864(2006)] |
| 49 |
EVect of α-Al/Al3Ni Microstructure on the Corrosion Behaviour of Al-5.4wt% Ni Alloy Fabricated by Equal-Channel Angular Pressing |
Y. Watanabe |
[Corrosion Science 49, 2962-2972(2007)] |
| 50 |
3DAP Analysis of Composition of Metastable Precipitates in Al-Zn-Mg Based Alloys |
K. Osamura |
[Journal of Japan Institute of Light Metals, Vol. 56, No. 11(2006), pp. 655-661] |
| 51 |
Change in Formability of AZ31 and AZ61 from Room to Elevated Temperatures |
H. Takuda |
[Proceedings of the 7 International Conference on Magnesium Alloys and Their Applications, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, (2006), pp. 330-335] |
| 52 |
A New Sorting Process of Aluminum Scraps Using Surface Morphology after Laser Irradiation |
T. Takemoto |
[Going Green CARE INNOVATION 2006 Proceedings, Nov. 13-16, Vienna, (2006), CD-ROM, 2.2.3: 1-4.] |
| 53 |
Hollow Amorphous Formation via Oxidation of Al Nanoparticles at Low Temperatures |
H. Nakajima |
[Materials Science Forum, Vol. 544-545(2007), pp. 347-350] |
| 54 |
Effects of Si and Mg on Bondability of Dissimilar Joining of Al Alloys to Steel for Light Weight Car Body |
A. Hirose |
[Smart Processing technology, Vol. 1(2006), Proceedings of International Symposium on Smart Processing Technology, High Temperature Society, pp. 13-16] |
| 55 |
The Effect of Oxygen on Heat Treatment Behavior of a Titanium-50mass%Tantalum-5mass%Zirconium Alloy |
M. Ikeda |
[Materials Science Forum Vols. 539-543(2007), pp. 3613-3618] |
| 56 |
Preparation of Nanostructured Silicon Carbide Using a Chemical Vapor Reaction |
H. Mabuchi |
[Proceedings of the 6th Pacific Rim Conference on Ceramic and Glass Technology(Pac Rim 6), The American Ceramic Society, CD-ROM 115, 2006, Total 14 pages ] |
| 57 |
High-Temperature Environmental Embrittlement of Thermomechanically Processed TiAl-Based Intermetallic Alloys |
T. Takasugi |
[Metallurgical and Materials Transactions A, Vol. 37, No. 2(2006), pp. 361-369] |
| 58 |
Mechanical Properties of Mg-Al-Ca Alloy Processed by Hot Extrusion |
K. Higashi |
[Materials Science and Engineering A, Vol. 454, (2007, pp. 384-388)] |
| 59 |
Mechanically Lithiated SnO as an Anodic Material for Secondary Battery |
T. Esaka |
[Electrochemistry, Vol. 74, No. 6(2006), pp. 463-466] |
| 60 |
Diffraction-Enhanced X-ray Imaging of Hydride in α-Titanium and Titanium Alloy |
K. Mizuno |
[Proceedings of the 8th International Conference on X-ray Microscopy (The Institute of Pure and Applied Physics, 2006, Tokyo) pp. 294-296] |
|
| 61 |
Surface Treatment of Al18B4O33 Whisker and Development of Al18B4O33/ZK60 Magnesium Alloy Matrix Composite |
G. Sasaki |
[J. Materials Processing Technology 187-188(2007), pp. 429-432] |
| 62 |
Effect on Annular Supersonic Jet by Geometrical Shape of Annular Nozzle |
T. Kojima |
[Journal of Jet Flow Engineering, Vol. 23, No. 3, (2006), 14-19] |
| 63 |
XPS Analysis of RF-Magnetron-Sputtered Calcium-Phosphate Coating |
K. Nakai |
[Journal of Japan Institute of Metals, Vol. 70, No. 4(2006), pp. 330-336] |
| 64 |
Effect of Microstructure Evolution on Mechanical Property in Metastable Titanium Alloy during Aging |
K. Nakai |
[Proceedings of the 16th International Microscopy Congress, 3 Materials Science (2006), p. 1600 ] |
| 65 |
Effect of Microstructure Evolution on Mechanical Property in Near- Titanium Alloy during Aging |
K. Nakai |
[Proceedings of the 16th International Microscopy Congress, 3 Materials Science (2006), p. 1671 ] |
| 66 |
The Evolution of Homogeneity in Processing by High-Pressure Torsion |
Z. Horita |
[Acta Materialia, 55, (2006), pp. 203-212] |
| 67 |
The Aging Characteristics of an Al-Ag Alloy Processed by Equal-Channel Angular Pressing |
Z. Horita |
[Materials Science and Engineering, A 437, (2006), pp. 240-247] |
| 68 |
Experimental Evidence for Grain-Boundary Sliding in Ultrafine-Grained Aluminum Processed by Severe Plastic Deformation |
Z. Horita |
[Advanced Materials, 18, (2006), pp. 34-39] |
| 69 |
Mechanical Properties of a Spray-Cast Aluminum Alloy Processed by Severe Plastic Deformation |
M. Furukawa |
[Materials Science Forum, Vols. 539-543(2007), pp. 141-148] |
| 70 |
Application of Equal-Channel Angular Pressing to Aluminum and Copper Single Crystals |
M. Furukawa |
[Materials Science Forum, Vols. 539-543(2007), pp. 2853-2858] |
| 71 |
A Finite Element Analysis of the Superplastic Forming of an Aluminum Alloy Processed by ECAP |
M. Furukawa |
[Materials Science & Engineering A, 456(2007), pp. 236-242] |
| 72 |
Inhibition of Al Grain Coarsening by Quasicrystalline Icosahedral Phase in the Rapidly Solidified Powder Metallurgy Al-Fe-Ti-Cr Alloy |
Y. Kawamura |
[Scripta Materialia, Vol. 56(2007), pp. 785-788] |
| 73 |
Etch Pit Observation of Dislocations in Early Deformation of Cu-Al Alloy and Pure Mg Polycrystals |
N. Ono |
[Key Engineering Materials, Vols. 345-346, (2007), pp. 25-28] |
| 74 |
Quantitative Evaluation of Acceleration Creep Characteristics in Binary Magnesium-Aluminum Alloys at Around 0.6Tm |
H. Sato |
[Fracture of Nano and Engineering Materials and Structures, Proceedings of the 16th European Conference of Fracture, Ed. By E. E. Gdoutos, Springer, (2006)] |
| 75 |
Effects of Reduced Pressure and Coat Permeability on Casting Characteristics of Magnesium Alloy in Evaporative Pattern Casting Process |
S. Koroyasu |
[Materials Transactions, Vol. 47, No. 11(2006), pp. 2798 to 2803] |
| 76 |
ELID Grinding Characteristics of Aluminum Bond Wheel by Accumulative Roll Bonding |
N. Itoh |
[Journal of the Japan Society for Abrasive Technology, Vol. 51, No. 51(2007), pp. 36-39] |
| 77 |
Creep and Creep Rupture of FSW Joints of 5052 Aluminum Alloy plates |
M. Kubota |
[Materials Science Forum, Vols. 519-521(2006), pp. 1175-1180] |
| 78 |
Development of a New Integrated Machining System — Improvement of Surface Characteristics on Metallic Biomaterials with a New Electrical Grinding System — |
K. Katahira |
[Journal of Machine Engineering, Vol. 7, No. 1, 2007, pp. 15-23] |
| 79 |
Development of Cutting-Burnishing Combined tool and Its Basic Performance — Compressive Residual Stress Generation within the Machined Surface — |
H. Sasahara |
[Journal of the Japan Society for Precision Engineering, Vol. 72, No. 7(2006), pp. 909-913] |
| 80 |
Processing of Closed-Cell Magnesium Foams |
K. Kitazono |
[Materials Science Forum Vols. 539-543, (2007), pp. 1839-1844] |
|
| 81 |
Influence of Excess Si on the Morphology and Thermal Stability of Metastable Precipitates Formed in an Al-Mg-Si Alloy |
M. Takeda |
[J. Japan Inst. Metals, Vol. 70, No. 8(2006), pp. 715 to 719] |
| 82 |
Recycling of Mg-Al-Ca Based Alloy by Vacuum Distillation |
M. Inoue |
[Materials Science Forum, Trans Tech Publications, Vols.561-565(2007), pp. 223-226] |
| 83 |
Extremely Small Thermal Conductivity of the Al-Based Mackay-Type 1/1-Cubic Approximants |
T. Takeuchi |
[Physical Review B 74, 054206 1-12(2006)] |
| 84 |
Effect of Hybrid Surface Modification Composed with Plasma-Carburizing and FPB Treatment on Fatigue Strength of Ti-6Al-4V Alloy |
T. Morita |
[Ti-2007 Science & Technology, Proceedings of the 11th World Conference of Titanium (JIMIC5), Vol. II, (2007), pp. 1659-1662] |
| 85 |
Effect of Compound-Layer Elimination and Introducing Compressive Residual Stress by FPB Treatment on Fatigue Properties of Plasma-Carburized Ti-6Al-4V Alloy |
T. Morita |
[Journal of Materials Science, Japan, Vol. 56, No. 9(2007), pp. 872-879] |
| 86 |
Effect of Strain Rate on Hot Ductility in Al-5mass%Mg Alloys Containing 2ppm of Sodium |
K. Horikawa |
[Journal of Japan Institute of Light Metals, Vol. 57, No. 1, (2007), pp. 25-29] |
| 87 |
Development of Water Jet Peening in Air and Application to Fretting Fatigue |
T. Yoshimura |
[Journal of Jet Flow Engineering, Vol. 24, No. 1(2007), pp. 11-17] |
| 88 |
Tensile Deformation and Recrystallization in Aluminum Bicrystal Having Symmetric 90 Tilt Grain Boundary |
T. Okada |
[J. Japan Inst. Metals, Vol. 70, No. 10(2006), pp. 790-796] |
| 89 |
Effects of Strain Rate and Temperature on Yield Locus for AZ31 Magnesium Alloy Sheet |
T. Naka |
[Journal of Key Engineering Materials, Vols. 340-341, (2007), pp. 119-124] |
| 90 |
Orientation Dependence of Fatigue Crack Propagation in Magnesium Single Crystals |
S. Ando |
[Journal of the Japan Institute of Metals, Vol. 70, No. 8(2006), pp. 634-637] |
| 91 |
Crack Orientation Dependence of Fatigue Behavior in Titanium Single Crystals by Thin Sheet Plain Bending |
S. Ando |
[Key Engineering Materials, Vols. 326-328(2006), pp. 967-970] |
| 92 |
Effect of Initial Grain Size and Strain Path on Grain Refinement in Magnesium Alloy AZ31 |
H. Miura |
[Materials Science Forum Vols. 539-543(2007), pp. 1632-1637] |
| 93 |
Low Temperature Superplasticity of Fine-Grained Magnesium Alloy AZ31 |
H. Miura |
[Advanced Materials Research Vols. 15-17(2007), pp. 467-472] |
| 94 |
Strain-Induced Grain Refinement in Magnesium Alloy AZ31 during Hot Forging |
H. Miura |
[Materials Science Forum Vols. 503-504(2006), pp. 521-526] |
| 95 |
Microstructure Development during Equal Channel Angular Extrusion of an Al-3%Cu Alloy |
H. Miura |
[Materials Science Forum Vols. 503-504(2006), pp. 829-834] |
| 96 |
Microstructural Changes in as-cast 7475 Al Alloy during Warm Sever Forging |
H. Miura |
[Materials Science Forum Vols. 539-543(2007), pp. 2922-2927] |
| 97 |
Distinguishing Ambient-Temperature Creep Region in Deformation Mechanism Map of Annealed CP-Ti |
E. Sato |
[Scripta Matrialia, Vol. 54(2006) 121-124] |
|
