PREFACE | METALLURGICAL ABSTRACTS ON LIGHT METALS AND ALLOYS Vol.30

INDEX

No	Title	Author
1	Formation and Breakdown of Anodic Oxide Films on Aluminum in Boric Acid/Borate Solutions	H. Takahashi
2	Evaluation of Imperfections in Anodic Oxides Films on Aluminum by Pit Formation Technique	H. Takahashi
3	The Corrosion Behavior of Sputter-Deposited Amorphous Al-Cr-Mo Alloys in 1 M HCl	K. Hashimoto
4	The Effects of Alloying Elements on the Passivity of Sputter-Deposited Amorphous Al-Cr-Mo Alloys in 1 M HCl	K. Hashimoto
5	The Sulfidation and Oxidation Behavior of Sputter-Deposited Amorphous Al-Nb Alloys at High Temperatures	K. Hashimoto
6	The High Temperature Sulfidation Behavior of Nb-Al-Si Coatings Sputter-Deposited on a Stainless Steel	K. Hashimoto
7	The Sulfidation and Oxidation Behavior of Sputter-Deposited Amorphous Al-Nb-Si Alloys at High Temperatures	K. Hashimoto
8	Measurements and Theoretical Estimations of Thermal Conductivities of Aluminum-base Composite Materials	Y. Waseda
9	Selictive Ion Sputtering and Initial Oxidation in Al-Pd-Mn Single Quasicrystals	Y. Waseda
10	Microstructure and Novel Properties of Nanocrystalline and Nanoquasicrystalline Alloys Prepared in Al Based Systems by Rapid Solidification	A. Inoue
11	Microstructure and Novel Properties of Nanocrystalline and Nanoquasicrystalline Alloys Prepared in Al-based Systems by Rapid Solidification	A. Inoue
12	New Aluminum Base Alloys	A. Inoue
13	High-Strength Nanoquasicrystalline Alloys	A. Inoue
14	Structure and Mechanical Strength of AI-V-Fe Melt-Spun Ribbons Containing High Volume Fraction of Nanoscale Amorphous Particles	A. Inoue
15	Formation and High Strength of Nanoamorphous Structure in Rapidly Solidified Al-Cr-Co-Ce and Al-V-Fe Alloys	A. Inoue
16	High Mechanical Strength of Al-(V,Cr,Mn)-(Fe,Co,Ni) Quasicrystalline Alloys Prepared by Rapid Solidification	A. Inoue
17	High Strength Al-Ti-Fe Alloys Consisting of Amorphous and fee-Al Phases Prepared by Rapid Solidification	A. Inoue
18	Superplastic Deformation Characteristics and Constitution Equation in Rapidly Solidified Mg-Al-Ga Alloy	A. Inoue
19	Synthesis and High Mechanical Strength of Al-Based Alloys Consisting Mainly of Nanogranular Amorphous Particles	A. Inoue
20	Deformation and Fracture Behavior of High-Strength Al94(V,Ti)4Fe2 and Al93Ti5Fe2	A. Inoue

21	High Strength Al-Based Alloys Consisting Mainly of Nanoscale Quasicrystalline or Amorphous Particles	A. Inoue
22	Formation and Precipitation Mechanisms of Nanoscale Al Particles in Al-Ni Base Amorphous Alloys	A. Inoue
23	Deformation and Fracture Behavior of High-Strength Al94(V,Ti)4Fe2 and Al93Ti5Fe2 Alloys Consisting of Nanogranular Amorphous and Al Phases	A. Inoue
24	Development of High-Specific Strength Al-Based Alloys by Utilizing Nanogranular Quasicrystalline Phases	A. Inoue
25	High-Strength Al-Based Alloys Consisting Mainly of Nanoscale Quasicrystalline or Amorphous Particles	A. Inoue
26	High-Strength Al-Based Nanostructure Alloys	A. Inoue
27	New Amorphous Alloys in Al-Si-Fe-Ni and Al-Si-Fe-Co Systems and Their Crystallization Behaviour	A. Inoue
28	Rapidly Solidified Powder Metallurgy Al-Ti-Fe Alloys	A. Inoue
29	High-Strength Al-Based Alloys Consisting Mainly of Nanoquasicrystalline or Amorphous Particles	A. Inoue
30	High Temperature Deformation and Creep	K. Maruyama
31	General Creep Characteristics of α₂ Single-Phase Polycrystalline Intermetallics	K. Maruyama
32	Creep Deformation and Creep Strength of TiAl	K. Maruyama
33	High Temperature Strength of α Ti-Al Alloys with a Locally Ordered Structure	K. Maruyama
34	Creep of a Ti-42 mo1% Al Lamellar Alloy at 1100K	H. Oikawa
35	General Creeep Characteristics of α2 Single-Phase Polycrystalline Intermetallics	H. Oikawa
36	High Temperature Strength of α Ti-Al Alloys with a Locally Ordered Structure	H. Oikawa
37	Anomalous High Temperature Strengthening in Concentrated αTitanium-Aluminum Alloys	H. Oikawa
38	Observation of the Steady-State Stage in High-Temperature Creep of γ-Ti-53Al Intermetallics under Low Stresses	H. Oikawa
39	Effect of Grain Size on High-Temperature Creep Behavior of γ-Ti-53 mo1%AI Intermetallics in the Low Stress Region	H. Oikawa
40	Transient Behavior after Stress Increase during Creep of α₂-Ti₃Al Intermetallics in the Low Stress Region	H. Oikawa

41	Prediction of Creep Rate at Elevated-temperatures	S. Goto
42	Acoustic Emission Behavior during a Small Punch Test for Mg-Al Alloys	T. Tozawa
43	Usefulness of the R-Type Specimen Method for Evaluation of Superplastic Characteristics in a 7475 Aluminum Alloy	T. Tozawa
44	Usefulness of the R-Type Specimen Method for Evaluation of Superplastic Characteristics	T. Tozawa
45	Continuous Casting of Semisolid Al-Si-Mg Alloy	T. Motegi
46	Conduction Mechanism in Quasicrystals	H. Ino
47	Intergranular Fracture in Some Precipitation-Hardened Aluminum Alloys at Low Temperatures	M. Kanno
48	Visualizing Technique of Impurity Hydrogen Evolved from Aluminum during Deformation	M. Kanno
49	Microstructures and Coarsening Behavior of Silicon Particles in P/M Al-Si-Cu-Mg Alloys Containing Fe and Ni	A. Kamio
50	Machinability of Aluminum-SiC Particle Composites during Cutting with Monocrystal Diamond Tools	T. Hasegawa
51	Effects of Addition of Alloying Elements on Superplastic Behavior in Mechanically Alloyed Aluminum Alloys	T. Hasegawa
52	Uniderectional Solidification of Particle Dispersed Composites by Zone Melting Method	H. Nakae
53	Equilibrium Contact Angle in the Magnesium Oxide/Aluminium System	H. Nakae
54	Behavior of Ceramic Particles at Solid/Liquid Interface during Solidification of Metal Matrix Composites	H. Nakae
55	Pressure Infiltration of Molten Aluminum into Preform of Granulated Whiskers	H. Nakae
56	Duplex Structure and Crystallization of Anodic Alumina Films	T. Osaka
57	The Influence of θ’ Precipitates on the Anodizing Behavior of Binary Al-Cu Alloys	K. Kodayashi
58	Effects of Friction Welding Conditions on the Mechanical Properties of Friction Welded Joints of 7075 Aluminum Alloy	H. Tokisue
59	Internal Oxidation in Mechanically Alloyed Al-Mg and Al-Li Alloys with Addition of Metal Oxide	J. Kaneko
60	Oxide Dispersed Materials Prepared by Reaction Milling of Al-Li and Al-Li-Mg Alloys with Various Oxides	J. Kaneko

61	Compressive Flow and Energy Absorption of Aluminum Honeycomb	M. Otsuka
62	Superplasticity in Coarse Grained Al-Mg Alloys	M. Otsuka
63	Effect of Cold-Rolling on Superplasticity of Warm-Worked 7075 Aluminum Alloy	T. Sakai
64	Characteristics of Coefficient of Friction under High Pressure	A. Azushima
65	Rolling and Recrystallization Textures in High Purity Al-Mg Alloys	H. lnagaki
66	Shear Bands in Cold Rolled Al-Mg Alloy Polycrystals	H. Inagaki
67	Plastically Accommodated Creep in Al-Al3Ni Composite	K. Kuribayashi
68	Internal Stress Superplasticity Induced by Thermal Cycling in Metal Matrix Composite	K. Kuribayashi
69	Experimental Verification of Internal Stress Superplasticity Model Using Al-Be Eutectic Alloy	K. Kuribayashi
70	Effect of Constitution for Al-Mg₂Si Alloys on Surfacial Quality of Extruded Al-Mg₂Si Alloys in Industrial Scale	M. Tokizawa
71	Influence of Edge Shape of Punch on Dynamic Behavior by Visualization of Shearing of Aluminum Alloy Sheet	M. Tokizawa
72	Effect of Precipitate State of Mg2Si on Surfacial Quality of Extruded Al-Mg2Si Alloys	M. Tokizawa
73	Inside Diameter Accuracy of Extruded Pipes by Porthole Die	M. Tokizawa
74	Examination of Working Limitation for Change of Sectional Shape on Dieless Shearing of Section	M. Tokizawa
75	Dimensional Accuracy of Rectangular Extruded Pipes by 4 Porthole Die	M. Tokizawa
76	Mechanical Alloying Process of Nb-Al Mixed Powders of Nb/3Al,2Nb/Al and 3Nb/Al Composition	S. Saji
77	Amorphization of Al-12at%Ti-X(X=Cr,Fe,Ni,Cu) Mixed Powders by Mechanical Alloying	S. Saji
78	Age-Precipitation in Al₂O₃ Particle/Al-Cu Alloy and SiC Particle/Al-Cu-Mg Alloy Composite Materials	S. Ikeno
79	Ageing Process of TiC Particle Dispersed Al-Cu and Al-Cu-Mg Composite Materials	S. Ikeno
80	STM Observation Near Grain Boundaries in Deformed Al-Zn-Mg Alloy	S. Ikeno

81	Effects of Grain Size and Dendrite Arm Spacing on Tensile Properties of Continuous-cast 6061 Aluminum Alloy Billets	S. Ikeno
82	Characteristics of a Vertical Semi-Continuous Casting Process Using Heat Insulating Mould for Aluminium Alloys	S. Ikeno
83	Effects of Grain Size on Localized Deformation Near Grain Boudaries in Al-1mass%Mg2Si Base Alloys	S. Ikeno
84	Solidification Position and Surface Condition in Aluminum Billets Produced by a Vertical Semi-Continuous Casting Process Using a Heat Insulating Mould	S. Ikeno
85	Effect of Deformation on Precipitation in Al-Mg₂Si Alloys Containing Silicon in Excess	S. Ikeno
86	Experimental Studies of Atomic Structure, Electronic Structure and Electronic Transport Mechanism in Amorphous Al-Cu-Y and Mg-Cu-Y Ternary Alloys	U. Mizutani
87	Theoretical Analysis of Phase Decomposition in Real Alloy Systems based on the Non-Linear Diffusion Equation	T. Miyazaki
88	Surface Modification of Aluminum Matrix Composites by Electrical Discharge Alloying	Y. Tsunekawa
89	Incorporation of Alumina Particles into Molten Aluminum by Melt Stirring with Ultrasonic Vibration	Y. Tsunekawa
90	Formation of Aluminum-Oxinitride on Aluminum Using Pulsed Electrical Discharge	Y. Tsunekawa
91	Incorporation of Alumina Particles with Different Shapes and Sizes into Molten Aluminum Alloy by Melt Stirring with Ultrasonic Vibration	Y. Tsunekawa
92	Formation of Compositionally Graded Ni-P Deposits Containing SiC Particles by Jet Electroplating	Y. Tsunekawa
93	Fatigue Properties and Microstructure of Al-Si-Cu System Casting Alloys	T. Kobayashi
94	Enhancement of Mechanical Properties by RRA Treatment in Al-SiCw Composite	T. Kobayashi
95	Fracture Characteristics of Light Alloys	M. Niinomi
96	Impact Fatigue Characteristics and Microstructure of Aluminum Casting Alloys Added with Fe and Ca	M. Niinomi
97	Rotating Bending Fatigue Characteristics of Implant Ti-5Al-2.5Fe Related to Microstructure in Air and Simulated Body Environment	M. Niinomi
98	Recent Developments in Japanese Titanium Research and Devolopment	M. Niinomi
99	Fracture Characteristics, Microstructure, and Tissue Reaction of Ti-5Al-2.5Fe for Orthopedic Surgery	M. Niinomi
100	Fracture Characteristics Analysis Related to the Microstructures in Titanium Alloys	M. Niinomi

101	Microstructure and Fracture Characteristics of Cast TiAl Intermetallic Compound	M. Niinomi
102	Elastic Moduli of Al-Li Alloys Treated at a High Pressure of 5.4 GPa	M. Senoo
103	Solid State Reaction between Powders and Foils by Low-energy Ball Milling	P. H. Shingu
104	Structural Changes during Low Energy Ball Milling in the Al-Ni System	P. H. Shingu
105	Elastic Constants of Al-base Icosahedral Quasicrystal	M. Koiwa
106	Elastic Constants and Their Temperature Dependence for the Intermetallic Compound Ti3Al	M. Koiwa
107	Single-Crystal Elastic Constants of r-TiAl	M. Koiwa
108	Development of Super-High Strength Al-Zn-Mg-Cu P/M Alloys	K. Osamura
109	Mesoscopic Structure of Super-High Strength P/M Al-Zn-Mg-Cu Alloys	K. Osamura
110	Simulation Study for Temperature-Dependence of Tensiles Strength of Continuous and Discontinuous Unidirectionally Fiber-Reinforced Metal Matrix Composites	S. Ochiai
111	Effects of Casting Conditions on Solidification Structure and Banded Segregation of Al-4.4% Cu Alloy Produced by Centrifugal Casting	I. Ohnaka
112	Flow in Solid-Liquid Coexisting Region and Banded Segregation in Centrifugal Casting	I. Ohnaka
113	Three Dimensional Mold Filling Simulation Method Usig Non-Orthogonal Element	I. Ohnaka
114	Formation of Ceramic Paticulate Reinforced TiAl Composites by Plasma Transferred Arc Processing	K. F. Kobayashi
115	Transient Liquid Phase Bonding Process in SiC Fiber Reinforced Ti-6Al-4V Composites	K. F. Kobayashi
116	Enhanced Milling Efficiency for Amorphization by Mechanical Alloying of a Powder Mixture of Pure Al and Atomized Al-20at%Cr Alloy	K. F. Kobayashi
117	Microstructural Dynamics in High Strain Rate Superplasticity	N. Furushiro
118	Observation of Welding Phenomena in Microgravity Environment	K. Nogi
119	Single-phase Interdiffusion in Intermetallic Compound TiAl	H. Nakajima
120	Diffusion of lron in a Dilute a-Ti-Fe Alloy	H. Nakajima

121	Single-phase Interdiffusion in Intermetallic Compound CoTi	H. Nakajima
122	Diffusion of lron in β Ti-Fe Alloys	H. Nakajima
123	Single-phase Interdiffusion in TiAl and Ti₃Al Intermetallic Compounds	H. Nakajima
124	Mn Self-diffusion in Single Grain Icosahedral Al₇₀Pd_21.5Mn_8.5 Quasicrystals	H. Nakajima
125	Interdiffusion in Ni₃Al	H. Nakajima
126	Interdiffusion in Binary beta-Titanium Alloys	H. Nakajima
127	High Temparature Mössbauer Study on the Fast Diffusion of Fe in Beta-TiFe Alloys	H. Nakajima
128	Diffusion in Quasicrystal and Amorphous Alloy with Wide Supercooled Liquid Phase	H. Nakajima
129	Diffusion of ⁵⁴Mn and ⁶⁸Gein Single Grain Icosahedral Al₇₀Pd_21.5Mn_8.5 Quasicrystals	H. Nakajima
130	A Precursor Effect Followed by the Fast Diffusion of Fe in β-TiFe Alloys	H. Nakajima
131	Application of Solution Temperature-Calculated Resistivity(T-ρ) Diagram Obtained from Binary Solubility Curves to Al-Zr Alloys	S. Komatsu
132	Application of Temperature-Resistivity Diagram Calculated from Binary Solubility Curves to Commercial Al-Zr-Fe-Si Alloy	S. Komatsu
133	Chemical Behavior of Aluminum Dross in Water	H. Tsubakino
134	Precipitation of Ni in Al-0.02at% Ni Alloy	H. Tsubakino
135	Grain Rotation during Grain Growth of Polycrystalline Aluminum	Y. Ogino
136	Determination of Material Properties from Lateral Compression Test of a Circular Tube	T. Yokoyama
137	Impact Tension Testing of Sheet Metals for Automobile Structural Uses	T. Yokoyama
138	Determination of Material Properties from Lateral Compression Test of a Circular Tube	T. Yokoyama
139	In-Situ Observation of the Motion and Growth of He Bubbles in Matrix and Along Grain Boundaries in Al	K. Ono
140	Reacted Structures and Wear Resistance of Particulate Anatase Type TiO2/Al Alloys Composites	H. Fukunaga

141	New Trends of Ceramics Fiber Reinforced Metal Matrix Composites	H. Fukunaga
142	Changes of Deformed Structures and Recrystallization Behaviors in {100} 〈110〉 Aluminum Single Crystals with Increasing Rolling Reduction	F. Inoko
143	An Investigation of the Properties of an Al-Mg-Li-Zr Alloy after Equal-Channel Angular Pressing	M. Nemoto
144	An Investigation of Microstructurel Stability in an Al-Mg Alloy with Submicrometer Grain Size	M. Nemoto
145	An Investigation of Grain Boundaries in Submicrometer-Grained Al-Mg Solid Solution Alloys using High-Resolution Electron Microscopy	M. Nemoto
146	Fabrication of Submicrometer-Grained Zn-22% Al by Torsion Straining	M. Nemoto
147	Enhanced Grain Growth in an Al-Mg Alloy with Ultrafine Grain Size	M. Nemoto
148	Microstructural Characteristics of an Ultrafine Grained Metal Processed with Equal-Channel Angular Pressing	M. Nemoto
149	Evolution of Grain Boundary Structure in Submicrometer-Grained Al-Mg Alloy	M. Nemoto
150	Microhardness Measurements and the Hall-Petch Relationship in an Al-Mg Alloy with Submicrometer Grain Size	M. Nemoto
151	Processing of an Al-Mg-Li-Zr Alloy with Ultra-Fine Grain Size	M. Nemoto
152	A Two Step Anodizing Process of Aluminum as a Means for Improving Chemical and Physical Properties of Oxide Films	H. Konno
153	Corrosion Assessment for Recycled Beverage Aluminum Alloy Container	O. Seri
154	High Temperature Deformation and Fracture Behaviour of Continuous Alumina Fiber Reinforced Aluminum Composites with Different Fiber Orientation	N. Matsuda
155	The Effect of Second Phase on the Creep Deformation of 6061 Al Matrix Composites	N. Matsuda
156	Diffusion Bonding of Al-Sn Alloys and Mo in the Atmosphere	I. Itoh
157	Thick-Aluminum-Coated Optical Fibers: Fabrication and Sensor Application	G. Motoyasu
158	A New Method for Continuous Casting of Particulate Reinforced Metal Matrix Composite Wires	G. Motoyasu
159	Eu Ion Implantation into a Barrier Type Anodic Oxide Film on Aluminum and it’s Electroluminescence	S. Morisaki
160	Self-Ordering of Cell Arrangement of Anodic Porous Alumina Formed in Sulfuric Acid Solution	H. Masuda

161	Bending, Flanging, and Hemming of Aluminum Sheet-an Experimental Study	M. Murata
162	Effects of Inclination of Die and Material of Circular Tube in MOS Bending Method	M. Murata
163	Thin Sheet Metal Punching by Elerctromagnetic Pressure Using Electrode Contact Method	M. Murata
164	Experimental Study of Square Tube Bending by MOS Bending Method	M. Murata
165	Effects of a Small Addition of Magnesium and Silver on the Precipitation of T1 Phase in an Al-4%Cu-1.1%Li-0.2%Zr Alloy	G. Itoh
166	Evidence for the Transport of Impurity Hydrogen with Gliding Dislocations in Aluminum	G. Itoh
167	Fabrication of Aluminum Based Functionally Graded Materials by Centrifugal Method and Their Physical Properties	Y. Watanabe
168	Analysis of Thermal Residual Stress in a Thick-Walled Ring of Duralcan-Base Al-SiC Functionally Graded Material	Y. Watanabe
169	Evaluation of Composition Gradient in Metal-Based Functionally Graded Material by Hardness Measurement	Y. Watanabe
170	TEM Study of Al₃Ti-Al, Al3Ni-Al Interfaces and Orientation Relationships in Centrifugally Cast Alloys	Y. Watanabe
171	High Strain Rate Superplasticity and Mechanical Properties after Superplastic Deformation of MA 2024Al-SiC Particulate Composites	K. Matsuki
172	Effect of Solidification Microstructure on the Strength and Ductility of PM2024-3Fe-5Ni Aluminium Alloy	K. Matsuki
173	Effect of Cr and Zr Addition on Microstructure and Mechanical Properties of PM Al-3Fe-3Ni Alloys	K. Matsuki
174	Development of Compressive Torsion Forming for Consolidation of Metal Powder	N. Kanetake
175	Electrochemical Evaluation of Aging of Al-Zn-Mg Alloys	T. Inoue
176	Chronopotentiometric Evaluation of Aging for Al-Mg Alloy	T. Inoue
177	Prediction of Forming Limit in Deep Drawing by Combination of Finite Element Simulation and Criterion for Ductile Fracture	H. Takuda
178	Prediction of Forming Limit in Deep Drawing of Fe/Al Laminated Composite Sheets Using Ductile Fracture Criterion	H. Takuda
179	Chemical Reaction and Decomposition of Non-corrosive Brazing Flux with Magnesium Containing Aluminum Base Metals	T. Takemoto
180	Diffusion of Copper in Supersaturated Nanocrystalline Al-7.8at%Ti-0.3at%Fe AIloy Prepared by Mechanical Alloying	Y. Minamino

181	Grain Growth Process in Al-0.3massMg Alloy	T. Shibayanagi
182	Friction Welding of Aluminum Alloy Pipe to S25C Carbon Steel Pipe	K. Ogawa
183	Recovery of Strength of 7050 Aluminum Alloy with Large Amount Impurities by RRA Treatment	T. Ohnishi
184	Effects of Heat-Treatment on Tensile Properties of 2017/6061 Aluminum Alloy Friction-Welded Joints	T. Ohnishi
185	Microstructure and Mechanical Properties of Ternary Ll2 Intermetallic Compound in Al-Ti-Cr System	H. Mabuchi
186	Negative Resistance Due to the Ballistic Conduction of Electrons in a Metal Single Crystal	E. Hashimoto
187	Purity Dependence of the Anisotropy of Residual Electrical Resistivity in High-Purity Al Single Crystals	E. Hashimoto
188	Interface Reaction and Structure in Silica-So1 Coated Aluminum Borate Whisker Reinforced Aluminum-Magneisum Alloy Matrix Composite	G. Sasaki
189	Microstructure of Metal-Ceramic Interfaces Fabricated Using the Surface Activated Bonding Method	G. Sasaki
190	Reactivity of Aluminum Borate Whisker with Aluminum Alloys	G. Sasaki
191	Microstructure and Strength of Al-Sapphire Interface by Means of the Surface Activited Bonding Method	G. Sasaki
192	Microstructure of TiO₂(rutile)/Al Composit	G. Sasaki
193	Reaction Squeeze Cast Processing and Intermetallics Dispersed Aluminum Matrix Composites	G. Sasaki
194	Enhanced Solid State Reaction of TiO₂/Al Composites by Doping	G. Sasaki
195	Fracture Toughness and Stress Corrosion Cracking of Aluminium-Lithium Alloys 2090 and 2091	S. Ohsaki
196	Improvement of Fracture Toughness of Aluminum-Lithium Alloy 8090 Plate by Double-Aging	S. Ohsaki
197	Fracture Toughness and SCC Behavior of 7075 Aluminum Alloy under Mixed-Mode I - II Loading	S. Ohsaki
198	Stress Corrosion Cracking of Aluminum Alloys	S. Ohsaki
199	Effect of High Pressure on Interdiffusion in Al-Zn-Mg Alloys	T. Takahashi
200	Application of the Dislocation Model to Microstructure of 〈110〉High Angle Tilt Boundaries	H. Nakashima

201	Prediction of Transition Stress in Solution Hardened Alloys at High Temperatures by Flow Stress Predicting Method	H. Nakashima
202	Microhardness Measurements and the Hall-petch Relationship in an Al-Mg Alloy with Submicrometer Grain Size	M. Furukawa
203	An Investigation of Grain Boundaries in Submicrometer-Grained Al-Mg Solid Solution Alloys Using High-resolution Electron Microscopy	M. Furukawa
204	An Investigation of the Properties of an Al-Mg-Li-Zr Alloy after Equal-Channel Angular Pressing	M. Furukawa
205	High-Resolution Electron Microscopy Observations of Grain Boundary Structures in Submicrometer-Grained Al-Mg Alloys	M. Furukawa
206	Structural Evolution and Validity of Hall-Petch Relationship in an Al-3% Mg Alloy with Submicron Grain Size	M. Furukawa
207	An Investigation of Microstructural Stability in an Al-Mg Alloy with Submicrometer Grain Size	M. Furukawa
208	Fabrication of Submicrometer-Grained Zn-22% Al by Torsion Straining	M. Furukawa
209	Significance of Microstructural Control for Superplastic Deformation and Forming	M. Furukawa
210	Improvement of Fatigue Life in Aluminium-Lithium Alloy by Grinding Surface Roughness Using Diamond Wheel	I. Fukumoto
211	Development of Forming Conditions for Injection Molding Products Using Aluminum Sludge as Material	I. Fukumoto