INDEX
| No | Title | Author |
|---|---|---|
| 1 | Hydrogen Desorption Behavior from Al-alloy Used as a Vatuum Chamber | T. Yamashina |
| 2 | Electrochemical Analysis of Imperfections in Anodic Oxide Films on Aluminum | H. Takahashi |
| 3 | Local Anodizing of Aluminum in a Sulfuric Acid Solution with Laser Irradiation | H. Takahashi |
| 4 | Film Breakdown and Pit Formation during Cathodic Polarization of Aluminum Covered with Anodic Oxide Films: Effect of Film Preparation and Structure | H. Takahashi |
| 5 | Improving the Mechanical Properties of Anodic Oxide Films on Aluminum Utilizing Mo-Oxyhydroxide Films | R. Furuichi |
| 6 | Interdiffusion in Binary Beta Titanium Alloys | H. Nakajima |
| 7 | Reaction Diffusion and Formation of lntermetallic Compounds in Ti-Al and Ti-Fe Systems | H. Nakajima |
| 8 | Self-diffusion of Manganese in Al-Pd-Mn Icosahedral Quasicrystals | H. Nakajima |
| 9 | Diffusion of Iron in Mg60Ni25Nd15Amorphous Alloys with a Wide Supercooled Liquid Region | H. Nakajima |
| 10 | Single-phase Interdiffusion in TiAl | H. Nakajima |
| 11 | Structure Change of TiAl during Creep in the Intermediate Stress Range | H. Oikawa |
| 12 | Effects of Solute Concentration on Creep Characteristics of Solution Hardened Al-Mg Alloys at 600K | H. Oikawa |
| 13 | Creep Behavior of Mg-0.5mol%Mn Alloy around 600K | H. Oikawa |
| 14 | Dynamic Recrystallization Regions in the Creep of Ti- 53Al Intermetallics | H. Oikawa |
| 15 | Creep Behavior and Substructures of α2 Ti-27 mol% Al Intermetallics | H. Oikawa |
| 16 | Elevated Temperature Strength of Titanium and Titanium- Aluminum Solid Solutions in the Alpha and Beta Ranges | H. Oikawa |
| 17 | Thermally Assisted Solid State Amorphization in Rod- milled Al50Hf50 Composite | K. Suzuki |
| 18 | Sputter-Deposited Amorphous Al-Mo-Si Alloys Resistant to High Temperature Sulphidation and Oxidation | K. Hashimoto |
| 19 | High Temperature Corrosion of Sputter-Deposited Al- Nb Alloys | K. Hashimoto |
| 20 | The Sulphidation Behavior of Mo-Al Alloys with Low Aluminum Contents | K. Hashimoto |
| 21 | Atomic Structures and the Mössbauer Effect in Amorphous La(FexAl1_x)13Alloys Consisting of Icosahedral Clusters | Y. Waseda |
| 22 | Anomalous SAXS Study on Structural Inhomogeneeity in Amorphous Zr33Y27Al15Ni25 Alloy | Y. Waseda |
| 23 | Functionally Graded Al-Zr-Based Amorphous Alloys | A. Inoue |
| 24 | New Al-Based Amorphous Alloys with High Mechanical Strength in the Al-Ni-M and Al-Co-M (M=Mn, Fe, Co, Ni) Systems | A.Inoue |
| 25 | Microstructure and Mechanical Properties of Rapidly Solidified AI-Cr-Ce-M (M=Transition Metal) Alloys Containing High Volume Fraction of the Icosahedral Phase | A. Inoue |
| 26 | AI-Ni-Y-Co Alloys Produced from Amorphous Powder by the Closed P/M Processing System | A. Inoue |
| 27 | Consolidation Mechanism of Aluminum-Based Amorphous Alloy Powders during Warm Extrusion | A. Inoue |
| 28 | Chemical Effects on Periodicity and Structure of Decagonal Phases in Al-Ni and Al-Co Base Alloys | A. Inoue |
| 29 | Mechanical Alloying of Aluminum and Al13Co4 to an Amorphous Phase | A.Inoue |
| 30 | High Strength P/M Aluminum Alloys Prepared through Crystallization of Amorphous Phases | A. Inoue |
| 31 | High-Strength Aluminum Alloys Prodtlced by Extrusion of Amorphous Phase Powders in a Closed Processing System | A. Inoue |
| 32 | Crystalline to Amorphous Phase Transition in Al-Ni-Co System during Mechanical Alloying | A. Inoue |
| 33 | Preparation of Ultrafine Al-based Quasicrystalline Particles by Reaction between Nitrogen Plasma and Molten Alloys | A. Inoue |
| 34 | Fabrication and Novel Properties of Nanostructured Al Base Alloys | A. Inoue |
| 35 | Transformation Behavior and Thermal Stability of Al-Based System Prepared by Ball Milling | A. Inoue |
| 36 | Light-Metal Base Amorphous Alloys Containing Lanthanide Metal | A. Inoue |
| 37 | Microstructure and Properties of Bulky Al84Ni10Ce6Alloys with Amorphous Surfase Layer Prepared by High-Pressure Die Casting | A. Inoue |
| 38 | Preparation of Ultrafine AlN Particles with Hexagonal Prism Shape by Reaction between Nitrogen Plasma and Molten Al-YAlloys | A. Inoue |
| 39 | Formation of Coexistent Icosahedral and f.c.c.-Al Phases in Rapidly Solidified Al-Ce-M-Si (M≡Transition Metal) Alloys and Their Mechanical Strengths | A. Inoue |
| 40 | Production of Al-Based Amorphous Alloy Wires with High Tensile Strength by a Melt Extraction Method | A. Inoue |
| 41 | Formation and Mechanical Properties of Amorphous Al-Ni-Nd Alloys | A. Inoue |
| 42 | High Mechanical Strength of Rapidly Al93Mn5Ce1M1 (M≡Transition Metal) Alloys Containing Nanoscale Quasi-Crystalline Phase as a Main Component | A. Inoue |
| 43 | The Effect of Cu Addition on the Structure and Mechanical Properties of Al-Ni-M (M≡Ce or Nd) Amorphous Alloys Containing Nanoscale f.c.c-Al Particles | A. Inoue |
| 44 | Preparation of Composite AlN and Metallic Particles in Al- Cr-M-N (M=Fe, Co or Ni) Systems by Reaction between Nitrogen Plasma and Molten Alloy | A. Inoue |
| 45 | Life Assessment of Elevated Temperature Components by Reference to Creep Damage | K. Maruyama |
| 46 | X-Ray Stress Measurement of α2 +γTwo-Phase TiAl Alloys | K. Maruyama |
| 47 | Non-steady-state Creep Concept and its Application to Practical Heat-resisting Materials | K. Maruyama |
| 48 | Interfacial Shear Strength of Some Aluminum-Ceramic Composites | S. Goto |
| 49 | The Structure and High-Temperature Deformation Properties in Dispersion Hardened MA Al-Al2O3-Al4C3 Alloys | K. Matsuura |
| 50 | Effects of Fibre Orientation on the Creep Strength of a Continuous Alumina Fibre-Reinforced Aluminum Composite | K. Matsuura |
| 51 | Acoustic Emission Generated during Compressive Deformation in Dual Phase Mg-Li Alloys | T. Tozawa |
| 52 | Usefulness of the R-type Specimen Method for Evaluation of Superplastic Characteristics in a 7475 Aluminum Alloy | T. Tozawa |
| 53 | Ultra-Precise Lapping of Magnetic Memory Disks with Automatic Conveyance | H. Eda |
| 54 | Effects of Process Variables on Cast Surface Quality of Alloy Rod Produced by the Horizontal Ohno Continuous Casting (OCC) Process | A. Ohno |
| 55 | Atmospheric Corrosion on the Die Casting AZ91D Magnesium Alloys with Paint Finishing | M. Takaya |
| 56 | Grain Refining Mechanisms of Pure Aluminum Ingots by Adding an Al-Ti-B Master Alloy | T. Motegi |
| 57 | Influence of Hydrogen on Defects of Iron and Aluminium Investigated by Transmission Electron Microscopy and Positron Annihilation | Y. Ishida |
| 58 | Semiconductorlike Transport in Highly Ordered Al-Cu-Ru Quasicrystals | H. Ino |
| 59 | Free Energy Analysis for the Phase Transition of Quasi-crystals and Phase Diagram of the Al-Cu-Fe System | H. Ino |
| 60 | ElectricalConductivity and Hall Effect of Al-Cu-Ru and Al-Cu-Fe Quasi-crystals | H. lno |
| 61 | Solidification and Falling Flow of AC4C Alloys during Vertical Centrifugal Casting for Containers without cores | T. Umeda |
| 62 | Fabrication of functionally Gradient Composite Al-Cr Alloys by Centrifugal Casting | T. Umeda |
| 63 | Precipitation Behavior of 7000 Alloys during Retrogression and Reaging Treatment | M. Kanno |
| 64 | Effect of Sodium on Hot Ductility of an Al-5mass%Mg Alloy and an Al-5mass%Mg-0.04mass%Y Alloy | M. Kanno |
| 65 | Analysis of Hydrogen Evolved from Fracture Surfaces of a TiAl Alloy | M. Kanno |
| 66 | The Effect of Incorporated Anions to the Sealing of Porous Anodic Films on Aluminum | N. Masuko |
| 67 | Wear of Carbide Tool in Turning of Mechanically Alloyed Aluminuim-ceramic Particle Composite Materials | T. Hasegawa |
| 68 | Relation Between Wear of Sintered Tools and Particle Hardness in Tools and Work Materials During Cutting of Particle Strengthened Aluminum Composites | T. Hasegawa |
| 69 | Infrared Radiation Characteristics of Oxides and Oxide Composites | S. Kohara |
| 70 | Polyaniline Secondary Cells with Ambient Temperature Molten Salt Electrolytes | N. Koura |
| 71 | Electrochemical Behavior of FeS2 Cathodes For Aluminum Secondary Cells around l00°C | N. Koura |
| 72 | Development of Al Electrode for the Secondary Battery with A1Cl3-l-butylpyridinium Chloride Molten Salt Electrolyte | N. Koura |
| 73 | Application of a Polyaniline/Polyanion Composite Film to a Positive Electrode for an Aluminum Secondary Cell with an Ambient Temperature Molten Salt Electrolyte | N. Koura |
| 74 | Wetting of Boron Nitride by Molten Al-Si Alloys | H. Nakae |
| 75 | Measurement of lnterfacial Energy Between Al-Si Eutectic Melt and Solid Si | H. Nakae |
| 76 | Effect of Cooling Rate on Modification of Al- Si Alloy Added by Sr | H. Nakae |
| 77 | The Role of Electron Tunnelling in the Development of Chemical Conversion Coatings on High Purity Aluminium | K. Kobayashi |
| 78 | The Development of Chemical Conversion Coatings on Aluminium | K. Kobayashi |
| 79 | Friction Welding of Cast-to-wrought Magnesium Alloy | H. Tokisue |
| 80 | Some Characteristics of TIG Welded Joints of AZ31 Magnesium Alloy | H. Tokisue |
| 81 | Weld Interface of Friction Welded Joints of Aluminum Alloy Composite to Aluminum Alloy | H. Tokisue |
| 82 | Weldability of Dissimilar Joint between Aluminum Alloy 5052 and Aluminum Alloy Castings AC4C by High Energy Density Welding Processes | H. Tokisue |
| 83 | Mechanical Properties of Friction Welded Joints of AZ31 Magnesium Alloy to 1050 Aluminum | H. Tokisue |
| 84 | Influence of Fabrication Method on the Structure and Mechanical Properties of SiCw/6061 Aluminum Alloy Composites | J. Kaneko |
| 85 | Structures and Properties of Rapidly Solidified Mg-Ca Based Alloys | J. Kaneko |
| 86 | Structures and Mechanical Properties of P/M Materials of Rapidly Solidified Al-8%Y Based Alloys Coctaining Transition Metals | J. Kaneko |
| 87 | High Temperature Creep of Rapidly Solidified P/M Al- Ti Alloy | M. Otsuka |
| 88 | Micro Drilling of 5056 Wrought Aluminum Alloy | M. Ogawa |
| 89 | Effect of Prior Warm-Deformation on Microstructure Evolution in Superplastic 7075 Aluminum Alloy | T. Sakai |
| 90 | On the Mechanism of Internal Stress Superplasticity | K. Kuribayashi |
| 91 | Shape Control of Rectangular Aluminum Ingot by Electromagnetic Casting and Its Quality | Y. Kojima |
| 92 | Estimation of Enthalpy in Non-equilibrium State of Melt-spun Al-Mn and Al-Mn-Co Alloys | S. Saji |
| 93 | Calorimetric Evaluation of Nonequilibrium State in As- Melt Spun Al-1.72 and Al-3.12 At. Pct Cu Alloys and Al-6.74, Al-8. 48, and Al-11.97 At. Pct Si Alloys | S. Saji |
| 94 | Effects of the Atmosphere on the Mechanical Alloying Process of Al-25at.%Ti Mixed Powder | S. Saji |
| 95 | Mechanical Alloying Process of Al-6at%Ti Mixed Powders by a High Energy Planetary Ball Mill | S. Saji |
| 96 | Micro Structures and Mechanical Properties of A356 Aluminum Casting Alloy | T. Takaai |
| 97 | Surface Residual Stress in Cold Rolled 5083 Aluminum Alloy Plate | T. Takaai |
| 98 | Changes in the Specfic Resistance Ratio Due to Isothermal Annealing Treatment in Cold Rolled Al-5mass% Mg Binary Alloy | T. Takaai |
| 99 | Effect of Cooling Rate on the Mechanical Properties of AC4CH Aluminum Alloy Castings | T. Takaai |
| 100 | Nano-ball bearing Effect of Ultra-fine Particles of Cluster Dia-Mond | K. Okada |
| 101 | Computer Simulations of Phase Decomposition in Real Alloy Systems Based on the Modified Khachaturyan Diffusion Equation | T. Miyazaki |
| 102 | The Role of Elastic Strain Energy on Two-Phase Microstructures | T. Miyazaki |
| 103 | Effect of Coherent Strain Energy on γ/γ' Phase Equilibria in Ni-Al-Ti Alloys | T. Miyazaki |
| 104 | Computer Simulation of Phase Decompositon in Real Alloy Systems Based on the Modified Khachaturyan's Diffusion Equation | T. Miyazaki |
| 105 | Experimental and Theoretical Investigations on Phase Diagrams of Fe Base Ternary Ordering Alloys | T. Miyazaki |
| 106 | Structures and Mechanical Properties of P/M Al-Mn-Li Alloys Containing a Large Amount of Mn | T. Ohashi |
| 107 | Application of Ultrasonic Vibration to Liquid Processing of Metal Matrix Composites | Y. Tsunekawa |
| 108 | Synthesis of Chromium Nitride in Situ Composite by Reactive Plasma Spraying with Transferred Arc | Y. Tsunekawa |
| 109 | Anomalous Heat Evolution of Deuteron Implanted Al Upon Electron Bombardment | K. Kameda |
| 110 | Microstructurally-Short Fatigue Crack in SiC Whisker Reinforced 6061 Aluminum Alloy Composite | T. Kobayashi |
| 111 | Effects of Aging Treatments on Fracture Characteristics of 6061 Aluminum Alloy Reinforced with SiC Whisker | T. Kobayashi |
| 112 | Aluminum and Copper Potential by Pseud-opotential Method for Molecular Dynamics | M. Senoo |
| 113 | Intermetallic Compound Consolidated by the EDC (Electro-Dischage Compaction) Method | H. Shingu |
| 114 | Formation of Intermetallic Compound by Mechanical Alloying | H. Shingu |
| 115 | Elastic Constants of Some Intermetallic Compounds as Determined by the Rectangular Parallelepiped Resonance Method | M. Koiwa |
| 116 | Kinetics of Phase Decomposition in Al- Li Alloys Studied by Computer Simulation and Synchrotron-Radiation Small-Angle/100 Scattering | K. Osamura |
| 117 | Development of High Strength Aluminum Alloys by Mesoscopic Structure Control | K. Osamura |
| 118 | Mesomechanical Approach to Temperature-Dependence of Tensile Strength of Continuous Fiber-Reinforced Aluminum Matrix Composites | S. Ochiai |
| 119 | The Effect of a Boundary Node on Intergranular Fracture of an α-CuAl Alloy at Intermediate Temperatures | S. Miura |
| 120 | Modeling of Fluid Flow and Solidification in Casting | I. Ohnaka |
| 121 | Computer Simulation of Mold Filling in Partially Fiber- Reinforced Casting | I. Ohnaka |
| 122 | Formation of New Phases by Chemical Leaching of Rapidly Solidified Alloys | I. Ohnaka |
| 123 | Fabrication of Bulk Amorphous Alloy by Rolling of Mechanically Alloyed Al-Cr Powders | K. F. Kobayashi |
| 124 | Amorphization of Al-Cr Atomized Powder by Mechanical Grinding | K. F. Kobayashi |
| 125 | Effect of Zr Addition on Superplastic Deformation of the Mg-8% Li Alloy | N. Furushiro |
| 126 | Texture Formation during Isothermal Forging of TiAl-base Alloys | N. Inakazu |
| 127 | Change in Resistivity and Strength of Al-Mg Solid Solutions by Cold Rolling and Annealing | S. Komatsu |
| 128 | Composition and Temperature Dependence of Resistivity of High Concentration Mg-Al Binary Solid Solution | S. Komatsu |
| 129 | Viscosity Measurements for Liquid Al-Ni-La and Al-Ni-Mm (Mm: Mischmental) Alloys by an Oscillating Crucible Method | Y. Ogino |
| 130 | Precipitation in Al-Li-Zn Ternary Alloys | H. Tsubakino |
| 131 | Precipitation of Metastable δ’ in Al-1・9Li-2・5Mg Alloy | H. Tsubakino |
| 132 | Impact Tension and Compression Testing of SiC/6061-T6 Al Composites | T. Yokoyama |
| 133 | In-Situ Observation of Damage Evolution in Aluminum Irradiated with H and He lons | K. Ono |
| 134 | Solid Solubility of Chromium in Aluminium at 0.1MPa and 2.1GPa | T. Yamane |
| 135 | Calorimetric Evaluation of Nonequilibrium State in As-Melt Spun Al-1.72 and Al-3.12 At. Pct Cu Alloys and Al-6.74, Al-8. 48, and Al-11.97 At. Pct Si Alloys | T. Yamane |
| 136 | Interference Characteristics of Two Parallel Supersonic Jets Issuing from Pipes with Different Diameters | T. Kojima |
| 137 | Jet Noise Containing Discrete Frequency (1st Report, Noise Characteristic and Generation Mechanism) | T. Kojima |
| 138 | Surface Effects on Recrystallization at Deformation Bands in Aluminum Single Crystals Deformed in Tension | F. Inoko |
| 139 | Effect of Dislocation Structure and Surface Orientation on Recrystallization in Aluminum Single Crystals Deformed in Tension | F. Inoko |
| 140 | The Effect of Scandium on the Age-Hardening Behavior of an Al-Cu Alloy | Y. Miura |
| 141 | Precipitation Hardening in an Al-2.4Li-0.19Sc Alloy | Y. Miura |
| 142 | Serrated Flow in High Temperature Deformation of Li2-(Al, X)3Ti Alloys | Y. Miura |
| 143 | Precipitation of Al3Sc in Al-0.23mass%Sc Alloy | Y. Miura |
| 144 | The Age-Hardening Characteristics of an Al-6061/Al2O3 Metal Matrix Composite | M. Nemoto |
| 145 | An Investigation of Ductility and Microstructural Evolution in an Al-3% Mg Alloy with Submicron Grain Size | M. Nemoto |
| 146 | An Investigation of Strain Hardening and Creep in an Al-6061/ Al2O3 Metal Matrix Composite | M. Nemoto |
| 147 | Insert Metal of Al-Sn Alloy for Diffusion Bonding in the Atmosphere | I. ltoh |
| 148 | Diffusion Welding of Al-Sn Alloy and Sttel in the Atmosphere | I. Itoh |
| 149 | Diffusion Bonding of Al2O3 and Ni Using an Al-Sn Alloy as an Insert Metal | I. ltoh |
| 150 | Diffusion Bonding between Al-Sn Alloy and Cu or 7-3 Brass in the Atmosphere | I. Itoh |
| 151 | Fracture Troughness of Aluminum Alloy Die Castings | K. Kanazawa |
| 152 | Corrosion Resistance of Al Roof in the Residential Area of Tokyo | S. Morisaki |
| 153 | Morphology and Boron Content of Anodic Aluminum Oxide Films Formed in Boric/Surfuric Acid Baths | S. Morisaki |
| 154 | Ordered Metal Nanohole Array by Two-Step Replication of Honey-comb Structure of Anodic Alumina | H. Masuda |
| 155 | Fabrication of Pt Microporous Electrodes from Anodic Porous Alumina and Immobilization of GOD into Their Micropores | H. Masuda |
| 156 | Rotary Forming for the Straightening of Tubing | K. Kawai |
| 157 | Control of Lamellar Arrangement in TiAl Alloys by High-Temperature Deformation in α Single Phase and Subsequent Annealing in Two Phase Region | H. Fukutomi |
| 158 | High Strain Rate Superplasticity of SiC Particulate Reinforced 7075 Aluminum Composites | K. Matsuki |
| 159 | Effect of SiC Particulate Content on Superplastic Flow Stress of 7075 Al-SiCp Composites | K. Matsuki |
| 160 | Mechanical Property and Microstructure of Plastically Deformed Aluminum Matrix Composite | N. Kanetake |
| 161 | In situ Observation in SEM on Microscope Deformation of Particle Reinforced Aluminum Matrix Composites | N. Kanetake |
| 162 | Generation of Pit and Interfacial Impedance Characteristics of Aluminum Foil for Electrolytic Capacitor in an Acid Solution | M. Okido |
| 163 | Interfacial Impedance Response of Wettability between Aluminum an Solders for Aluminum | M. Okido |
| 164 | Evaluation of Wettability between Pure Aluminum and Lead,Lead-Tin by Means of Interfacial Impedance Technique | M. Okido |
| 165 | The Elimination of Component Materials from Aluminum Matrix Composite by a Molten Salt Process and the Mechanism of this Process | T. Inoue |
| 166 | Influence of Cold-Rolling and Annealing Conditions on Formability of Aluminium Alloy Sheet | H. Takuda |
| 167 | Solid Solubility of Chromium in Aluminium at 0.1MPa and 2. 1GPa | Y. Minamino |
| 168 | Friction Welding of 2017 Aluminum Alloy and S45C Carbon Steel Using Insert Metal | K. Ogawa |
| 169 | Combustion Synthesis of TiAl-matrix Composites in the Ti-Al-BN System | H. Mabuchi |
| 170 | Anisotropy of the Temperature Dependence of Electrical Resistivity in Aluminum Single Cystals | E. Hashimoto |
| 171 | lnterdiffusion in the α Solid Solutions of Al-Cu-Zn System at 817K | T. Takahashi |
| 172 | Interdiffusion in Al-Cu-Mg Alloys under High Pressure | T. Takahashi |
| 173 | Effect of High Pressure on Interdiffusion in Al-Cu-Zn Alloys | T. Takahashi |
| 174 | threshold Stress for High-Temperature Deformation of Dispersion-Strengthened Alloys | H. Nakashima |
| 175 | Experimental Examination of Measurement Techniques of Threshold Stress in a Dispersion-Strengthened Alloy for High-Temperature Deformation | H. Nakashima |
| 176 | Method for Predicting Flow Stress of Solution- and Dispersion Hardened Alloys at High Temperatures | H. Nakashima |
| 177 | A New Technique for the Threshold Stress Determination in Dispersion-Strengthened Alloys | H. Yoshinaga |
| 178 | Threshold Stress and Its Temperature Dependence for High-Temperature Deformation in a Precipitation-Hardened Al-0.7at% Mn Alloy | H. Yoshinaga |