INDEX
| No | Title | Author |
|---|---|---|
| 1 | Fatigue Life of Aluminum Bicrystals | K. Atagi |
| 2 | Electrochemical Integration of an Electroluminescent Mn Activator into Porous Anodic Al2O3 Film on Al | N. Baba |
| 3 | Rotary Blanking using a Rotary Forging Machine | M. Hayama |
| 4 | Effect of Microstructure on High-Cycle Fatigue Behavior of Al-Li Binary Alloy | S. Hori |
| 5 | Composite Precipitates in Al-Li-Ti Alloys | S. Hori |
| 6 | Precipitation Behavior during Aging in a Rapidly Solidified Al-1.7%Cr-1.8%Zr Alloy | S. Hori |
| 7 | Temperature Dependences of Mechanical Properties at Very Low Temperatures in 5083 Aluminum Alloy | S. Hori |
| 8 | Mechanical Properties of 7075 Aluminum Alloy at 6－130K | S. Hori |
| 9 | Effect of Stress on the Liguid Gallium Embrittlement of Aluminum | S. Hori |
| 10 | Solidification Process of Al-8%Pb System Alloys Cast into a Movable Metal Mold with Water Spraying | T. Ikeda |
| 11 | Effect of Texture on Strength of Extruded Aluminum Alloy 6061 | N. Inakazu |
| 12 | Local Magnetic Moment in AL-Mn Based Quasicrystals | H. Ino |
| 13 | Local Atomic Configuration Studied by Mossbauer Spectroscopy and Crystallographic Texture in Al-Mn Based Quasicrystals | H. Ino |
| 14 | Recrystallization of Aluminum Bicrystals with {211} Tilt Grain Boundaries | F. Inoko |
| 15 | Recrystallization of Aluminum Bicrystals with a π/2 Radian {211} Twist Grain Boundary | F. Inoko |
| 16 | Formation of Recrystallized Grains due to Strain Induced Boundary Migration in Aluminum Bicrystals with {211} Tilt Boundary | F. Inoko |
| 17 | Scanning Tunneling Microscopy with Atomic Resolution in Aqueous Solutions | K. Itaya |
| 18 | In-Situ Scanning Tunneling Microscopy of Platinum Electrode in Sulfuric Acid | K. Itaya |
| 19 | Bend Tests and Fracture Mechanism of Tial Single Crystals AT 293－1073K | O. Izumi |
| 20 | Studies on Temperature Controlling Sheet Metal Forming of Various Materials | K. Kato |
| 21 | Cu-Zn-Al Shape Memory Alloy Coupler Fabricated by DI Process | K. Kato |
| 22 | Driving Force for G.P. Zone formation in an Al-Cu alloy | T. Kamijo |
| 23 | Experimental Determination of the Force-Distance Relation for the Interaction between a Dislocation and Solute Atom | T. Kino |
| 24 | Low-Temperature Amplitude-Dependent Internal Friction of Dislocation-Point Defect Systems | T. Kino |
| 25 | High-Field Magnetoresistance in Monocrystalline Aluminum with Vacancy Clusters | T. Kino |
| 26 | Magnetic-Breakdown Oscillations in Magnetoresistivity in Aluminium Single Crystals | T. Kino |
| 27 | Vacancy Emission from and Absprption to a Helical Dislocation in Aluminum | T. Kino |
| 28 | Vacancy Generation in Nearly Perfect Aluminum Single Crystals | T. Kino |
| 29 | Development of Filtration Machine of Machining Fluids Using Ultra-precision Proecessing Machine | K. Kishi |
| 30 | Ultra-Presition Cutting of Electroless Nickel-Plating Layer | K. Kishi |
| 31 | Investigation of Ultra-Precise Cutting ―Machining of Magnetic Disk Substrate― | K. Kishi |
| 32 | Optimum Abrasive Grinding for Magnetic Memory Diskes ―Using the IBM Grinding Method― |
K. Kishi |
| 33 | Impovement of Superplasticity in 7475 Al Alloy Processed by Cryogenic Metalworking and Heat Treatment | M. Kobayashi |
| 34 | Fabrication and Mechanicl Properties of SiC Whisker-Aluminum Composite Materials | S. Kohara |
| 35 | High Temperature Deformation of Dispersion Hardened Al-Mg Alloys | M. Koiwa |
| 36 | Estimations of Solute Concentrations in Hot and Cold rolled 1050 Aluminum | S. Komatsu |
| 37 | Misorientation Dependence of Susceptibility to Intergranular Stress Corrosion Craking in Symmetrical <110>-Tilt Cu-9at%Al Alloy Bicrystals | T. Mimaki |
| 38 | Effect of Grain-Bonudary Structure on Stress Corrosion Cracking in αCu-Al Alloy Bicrystals | T. Mimaki |
| 39 | Grain-boundary Sliding and Triple-point Fold in Aluminum Tricrystals | S. Miura |
| 40 | A New Mechanism for Phase Decomposition in Elastically Constrained Systems | T. Miyazaki |
| 41 | Shape Bifurcations in the Coarsening of Precipitates in Elastically Constrained Systems | T. Miyazaki |
| 42 | Preparation of some Aluminum Alloys by Mechanical Alloying and Their Mechanical Properties | T. Morooka |
| 43 | Microstructure and Shear Band Formation in Rolled ingle Crystals of Al-Mg Alloy | Y. Nakayama |
| 44 | Fabrication of Fiber Reinforced Metal using Superplastic Metal Poweder as Matrix | H. Nishimura |
| 45 | Application of Superplasticity on the Febrication of Fiber Reinforced Metal | H. Nishimura |
| 46 | Effects of Cathodic Hydrogen Charging on the Mechanical Properties of the Al-Li-Cu-Mg-Zr Alloy | T. Ohnishi |
| 47 | Stress Corrosion Cracking of the Al-Li-Cu-Mg-Zr Alloy | T. Ohnishi |
| 48 | Grain Refinement of Continuously Cast Aluminum Ingot Using a Heating Oscillator | A. Ohno |
| 49 | Grain Refinement of Aluminum Ingots Using a Heating Oscillator | A. Ohno |
| 50 | In-situ Observation of Solidification Phenomena of Al-Si and Al-Ge Alloys | A. Ohno |
| 51 | Influence of Superplastic Prestraining on Tensile Properties of 7475 Aluminum Alloy | H. Oikawa |
| 52 | Further Experimental Study of the Deformation Characteristics of Al-Mg Alloys in the Power-Law Creep Regime | H. Oikawa |
| 53 | Friction Behaviors of Chopped Carbon Fiber Reinforced Al-Cu Alloy Matrix Composites | K. Okada |
| 54 | Effect Purity of Brazing Aluminum Base Metals on Long Time Brazability | I. Okamoto |
| 55 | Chemical Composition of G.P. Zones in Al-Ag Alloys | K. Osamura |
| 56 | Early Stage of Phase Decomposition in an Al-6.7at% Zn Alloy | K. Osamura |
| 57 | Scaling of Precipitated Structure in Al-Zn Alloys | K. Osamura |
| 58 | Dynamical Structure Change During Reversion Above Zone Solvus in Al-Zn Binary Alloys | K. Osamura |
| 59 | In Situ Determination of Casting Defects in Solidifying Al-7%Si Alloy Casting by the Acoustic Emission Method | S. Oya |
| 60 | Ion-Induced Surface Segregation in Al-Mg By ISS-AES Sequential Measurement | R. Shimizu |
| 61 | Fundamental Point Defect Processes of Damage Evolution in Fusion-Neutron-irradiated Pure Aluminum | Y. Shimomura |
| 62 | Mechanical Alloying and Consolidation of Aluminum-iron System | H. Shingu |
| 63 | Microstructural Aspects of Rapidly Solidified Al-Mg Alloys | H. Shingu |
| 64 | Unidirectionally cooled eutectic and eutectoidal composites of the Al-Cu alloy | K. Shinohara |
| 65 | Precipitation Behavior during Aging of Rapidly Solidified Al-Cr Alloys | H. Tai |
| 66 | Anodizing of Magnesium Alloy in KOH-Al(OH)3 Solutions | M. Takaya |
| 67 | Production of Al-Based Ternary and Quaternary Icosahedral Phases | S. Takeuchi |
| 68 | Electrical Properties of Single Phase Al-Based Quasicrystals | S. Takeuchi |
| 69 | Turning Machinabilty of Magnesium Alloy Castings for High-temperature Structures | H. Tokisue |
| 70 | Improvement of Extrusion Yield Examined from Plastic Flow of Billet Surface Layer | M. Tokizawa |
| 71 | Effects of Die Angle on Pressure Distribution at Internal Surface of Die Block and Extrudability of Billet in Hot Extrusion | M. Tokizawa |
| 72 | Change in the Grain Size Distribution during Grain Growth in Recrystallized Aluminum | T. Tozawa |
| 73 | Effect of Chromium on Recrystallized Grain Size of Al-1%Mg-0.6%Si and Al-3%Mg Alloys | H. Yamada |
| 74 | Interdiffusion in a Dilute Solid Solution of the Al-Li Alloy Measured by Electrical Resistance | T. Yamane |