Metallurgical Asstracts on Light Metal and Alloys

vol.19

INDEX

No Title Author
1 Diffusion Welding of Titanium to Al-Cu-Mg Series A2017 Alloy T. Enjo
2 Deviation from Viscous Glide Creep in Class A Alloys T. Endo
3 A Study of Deformation in Rotary Cropping of a Cylindrical Rod M. Hayama
4 Stoichiometry of Quasicrystalline Al-Mn S. Takeuchi
5 Lattice Imaging Analysis and Mössbauer Spectroscopy of Liquid-Quenched Al-Fe Alloy H. Ino
6 Computer Simulation on the Structure Solidified by Rapid Cooling for Al-Pb Alloys T. Ikeda
7 Computer Simulation on the Reduction of Gravity Segregation for Al-Pb Alloys by the Rapid Solidification Method T. Ikeda
8 Solidified Structures and Gravity Segregation of an Al-8%Pb-4%Si Alloy T. Ikeda
9 Recrystallization Behavior of Drawn Al-Mn-Fe Alloy Accompanied by Precipitation N. Inakazu
10 Effect of Fine Zr-Compound on the Formation of Solution Annealed Al-Zn-Mg-Cu Alloys K. Ito
11 Properties of Porous Anodic Aluminum Oxide Films as Membranes K. Itaya
12 Performance of Sintered Al-10%Pb-4%Cu Porous Bearings M. Kato
13 DSC Dislocation Mechanism of Grain Boundary Sliding in Aluminium T. Kamijo
14 Trial Manufacture of a Personal-computer-controlled Super Precision Lathe K. Kishi
15 A Study on Super Precision Cutting
―Trial Manufacture of and Experiments on a Super Precision Lathe―
K. Kishi
16 Effects of Prestrain at High Temperatures on the Strength of Aluminum S. Kikuchi
17 Application of Matthiessen's Rule to Resistivity Measurement and Behaviors of Fe and Si in Al050 Rolled Sheets S. Komatsu
18 Stress Corrosion Cracking of Cu-9 at%Al Alloy Bicrystals S. Miura
19 Stress Corrosion Cracking of Cu-9 at.%Al Alloy Single Crystals S. Miura
20 Stress Corrosion Cracking of Two-phase (α/β)-Brass Bicrystals S. Miura

Back to top

21 Stress Corrosion Cracking of β-Brass Bicrystals S. Miura
22 Stress Corrosion Cracking of α-Brass Bicrystals S. Miura
23 Stress Corrosion Cracking in (α+β)-Brass Polycrystals S. Miura
24 An Automated X-Ray Stress Measurement System Using a Microcomputer M. Miyagawa
25 Decomposition Characteristics of Al-Mn-Zr Alloys Rapidly-Quenched from the Melt T. Ohashi
26 Solidified Structure and Hot-tearing of Al-4.5%Cu and Al-4.5%Cu-5%Si Alloys Containing Various Additives S. Oya
27 Stress Corrosion Cracking of 7075 Series Aluminum Alloys T. Ohnishi
28 Electron Microscopic Studies of Damage Evolution in Fission Neutron-Irradiated Metals Y. Shimomura
29 Low Temperature D-T Neutron Irradiation and Cryotransfer Observation of Cascade Defects of Metals Y. Shimomura
30 Ion-Irradiation Experiment for the Fundamental Studies of Damage Evolution of Fusion Materials Y. Shimomura
31 Effect of Cold Rolling on Charpy Impact Properties of Medium Strength Aluminum Alloy T. Takaai
32 Tensile Deformation and Fracture Behaviors of Pure Aluminum and Aluminum Alloy at Cryogenic Temperatures T. Takaai
33 Effect of Cold Rolling on Impact Fracture Properties of Alloy 5083 T. Takaai
34 Relation between the Segregation of Silicon and the Pore Formation during the Unidirectional Solidification of Al-16%Si Alloy Y. Ueda
35 Effect of Primary Inclusion on Recrystallization of AI-Fe and AI-Fe-Si Alloys H. Yamada
36 An Investigation on G.P. Zone Formation in Al-Cu Alloys Based on High Resolution Electron Microscopy H. Yoshida
37 Electrical Properties of Anodic Oxidation Coatings on Aluminum Formed in Alkaline Baths C. Yoshimura
38 Hydrothermal Treatment of Aluminum Anodic Coatings at High Pressure C. Yoshimura
39 Reliability of Experimental Values for Work-Hardening and Recovery Rates in Pure Aluminum during High Temperature Deformation H. Yoshinaga
40 Work-Hardening and Recovery Rates in Pure Aluminum Single Crystals during High-Temperature Deformation H. Yoshinaga

Back to top