|1||Diffusion Welding of Al-Cu-Mg Series A2017 Alloy.||T. Enjo|
|2||High Resolution Electron Microscopy of a Rapidly Quenched Al-Sn Alloy.||Y. Ishida|
|3||Structure of 57Co-Vacancy Complexes in Aluminium.||Y. Ishida|
|4||Effect of Cold Working and Aging Treatment on the Ductility of an Al-6.0%Zn-2.6%Mg Alloy at 4.2 to 293K.||O. Izumi|
|5||Positive Temperature Dependence of the Yield Stress in TiAl Ll0 Type Superlattice Intermetallic Compound Single Crystals at 293―1273K.||O. Izumi|
|6||Formation of (4 4 11) [11 11 8] Orientation in an Aluminium Alloy Rolled just below Recrystallization Temperature.||T. Kamijo|
|7||Effect of Ratio of Mg to Cu on Age-Hardening Characteristics of Thermo-mechanically Treated Al-Cu-Mg Ternary Alloys.||J. Kaneko|
|8||Effect of Work Hardening Property on Pick-up Behavior of Aluminum and its Alloys.||. Kato|
|9||Relationship between Grain Refinement and Electromagnetic Stirring of Molten Aluminium||Y. Kawano|
|10||Vacancy Source in Nearly Perfect Crystals||T. Kino|
|11||Thermal Equilibrium Measurement of the Doppler-Broadened Lineshapes of Positron Annihilation in Dilute Aluminium-Based Alloys.||T. Kino|
|12||Dislocation-Solute Interaction Studied by Amplitude-Dependent Internal Friction in Al-0.01 at % Si Alloy.||T. Kino|
|13||Formation Mechanisms of an Ultra-Precision Machined Surface with a Single Point Diamond Tool.||K. Kishi|
|14||A Research on the Improvement of Comprehensive Material Performance of Aluminium Alloys for VTR Cylinder.||K. Kishi|
|15||A Consideration on the Prospects of Ultra Precision Working Techniques.||K. Kishi|
|16||Problems of Materials Used for Ultra-Precision Cutting.||K. Kishi|
|17||Creep Deformation of Al-Al2O3 and Al-Al2O3Si Alloys.||K. Matsuura|
|18||Studies on the BLOW HOLES in Aluminium MIG WELDS.
―Report 1 On the surface treatments of base metal and the characteristics of treated surfaces―.
|19||Studies on the BLOW HOLES in Aluminium MIG WELDS.
―Report 2 On the some characteristics of blow holes in welds―.
|20||Studies on the BLOW HOLES in Aluminium MIG WELDS.
―Report 3 Apportion of hydrogen gas absorbed into molten pool of Aluminium weld―.
|21||Effect of Interfacial Conditions on the Tensile Strength of Carbon Fiber-6061 Aluminum Alloy Composites.||Y. Murakami|
|22||Interpretation of the Voltage-Current Characteristics Observed When Anodizing Aluminum in Acid Solutions.||M. Nagayama|
|23||Distribution of Anions and Protons in Oxide Films Formed Anodically on Aluminum in a Phosphate Solution.||M. Nagayama|
|24||Factors Contributing to Shear Band Formation in Al-3%Mg Single Crystals.||Y. Nakayama|
|25||Inverse Segregation in Unidirectionally Solidified Al-Cu Alloy Ingots.||A. Ohno|
|26||Statistical Study on Stress Corrosion Cracking of the Al-Zn-Mg Alloy.||T. Oka|
|27||Ductility Loss of Al-Mg Alloys at High Temperatures.||M. Otsuka|
|28||Origin of the Ductility Loss of Al-Mg Alloy at High Temperatures.||M. Otsuka|
|29||Grain Boundary Behaviors and Ductility in Al-Mg Alloy at High Temperatures.||M. Otsuka|
|30||Evaluation of Hot Tearing in Binary Al-Cu and Al-Si Alloy Castings by the I-Beam Test.||S. Oya|
|31||Fracture Behavior of Aluminium Composites Reinforced with Fiber||K. Sakamaki|
|32||Anodic Polarization Behavior of High Purity Aluminum in Sodium Chloride Aqueous Solution Adjusted to Various pH’s.||E. Sato|
|33||Filiform Corrosion of Aluminum||E. Sato|
|34||Influence of Iron and Copper in Aluminum on Filiform Corrosion.||E. Sato|
|35||Adhesive Bonding of Various Metals onto SiC or C Fibers.||K. Shinohara|
|36||The Effects of Zr or Cr Addition on the Recrystallization Behavior of Al-Zn-Mg-Cu Alloys.||H. Suzuki|
|37||Aging Phenomena of Rapidly Solidified Al-4mass%Cu-Cr Alloys.||H. Suzuki|
|38||Precipitation of Chromium Bearing Compounds in an Al-Zn-Mg-Cu Alloy Containing Chromium.||H. Suzuki|
|39||Influence of Anisotropy on the Compressive Characteristics of a 5083 Aluminum Alloy Sheet.||T. Takaai|
|40||Effect of Cold Rolling on the Charpy Impact Fracture Characteristics of 5083 Aluminum Alloy.||T. Takaai|
|41||An Experimental Study on Die Shapes for Balancing Metal Flow in a Hot Extrusion
―extrusion of thin shapes of auminum alloy with a constant thickness through a die orifice concentric to the extrusion axis―.
|42||On Direct Hot Extrusion Characteristics of a High Strength Al-5mass%Mg Alloy Billet Coated with Pure Aluminium.||M. Tokizawa|
|43||Edgewise Bending of Flat Bar by New “Bend-Rolling” Process.||Y. Tozawa|
|44||Effects of Silicon and of the Coexistence of Iron and Silicon on Recrystallization of Aluminum.||H. Yamada|
|45||Effect of High Pressure on React Diffusion in the Al-Ag System.||T. Yamane|
|46||Interdiffusion in the Al-Ag Alloy under High Pressure.||T. Yamane|
|47||Anodizing of Aluminum in Sodium Carbonate Bath Containing Fluoride.||C. Yoshimura|
|48||Properties of the Anodizing Film on Aluminum Formed under High Current Density.||C. Yoshimura|
|49||A New Method for Coloring Anodic Oxide Film on Aluminum.||C. Yoshimura|
|50||High Temperature Deformation of 2324 and 7475 Alloys.||H. Yoshinaga|