INDEX
| No | Title | Author |
|---|---|---|
| 1 | Influence of Tempering Conditions on the Deep Drawability of 5052 and 5083 Aluminum Alloys | K. Aoki |
| 2 | Effects of Relatively Insoluble Compounds and β Phase on Stress Corrosion Cracking in 5083 Aluminum Alloy | T. Enjo |
| 3 | Stress Corrosion Cracking in Welds of Al-Zn-Mg Series 7N01-T4 Alloy | T. Enjo |
| 4 | Fractography of Lamellar Tearing of 5083 Aluminum Alloy and Its Welds | T. Enjo |
| 5 | Solidified Structure, Precipitation and Recrystallization Characteristics of Al-Hf Alloys | S. Hori |
| 6 | Structure of Rapidly Solidified Al-Zr Alloys and Its Thermal Stability | S. Hori |
| 7 | Structure of Rapidly Solidified Al-Hf Alloys and Its Thermal Stability | S. Hori |
| 8 | Castability of a Pasty Semi-Solid Aluminum Alloy into a Shell Mold | R. Ichikawa |
| 9 | Bulge Behavior of Aluminum Foil at Room Temperature Relation between Membrane Force and Surface Strain | S. Inada |
| 10 | The Initiation of Fatigue Cracks along Crystal Boundaries in Aluminum Bicrystals | F. Inoko |
| 11 | Cyclic Tensile Deformation of Aluminum Bicrystals | F. Inoko |
| 12 | Determination of the Burgers Vector of a Dislocation by Weak-beam Image in High Voltage Electron Microscope | Y. Ishida |
| 13 | Relation Between Deep Drawing Speed and Aluminum Properties | K. Kato |
| 14 | Computer Simulation of Spatial Grain Distribution | A. Nishimura |
| 15 | The Reduction of Machined Surface Layer by Means of Super Speed Cutting of Aluminium Alloys | K. Kishi |
| 16 | Developing Study of the New Free Cutting Aluminium Alloys | K. Kishi |
| 17 | The Temperature Dependence of Work-Hardening due to Orowan Loops in a Dispersion-Hardened Alloy | K. Matsuura |
| 18 | Plastic Deformation of Aluminum Bicrystals Having Σ7 and Σ21 Coinsidence Tilt Boundaries | S. Miura |
| 19 | Dislocations in Aluminum Sheets at High Temperatures | Y. Miura |
| 20 | Lattice Defects in Well Annealed Aluminum as Revealed by X-ray Topography | Y. Miura |
| 21 | Effects of Cooling Rate on Dislocation Density in Annealed Aluminum Sheets | Y. Miura |
| 22 | Relation between Aging Characteristics and Weld-solidified Structure in Al-Zn-Mg Alloy Welds | M. Mizuno |
| 23 | Effects of Grain Size and Dendrite Cell Size on the Aging Characteristics of Rapidly Solidified Al-Zn-Mg Alloy | M. Mizuno |
| 24 | Aging Behavior of Heat-affected Zones in Al-Zn-Mg Alloy Welds | M. Mizuno |
| 25 | Aging Behaviors of the Heat-affected Zones in Al-Zn-Mg Alloy Two-pass Welds | M. Mizuno |
| 26 | Effect of Pre-heat Treatment Conditions on Aging Behavior of the Heat-affected Zone in Al-Zn-Mg Alloy Welds | M. Mizuno |
| 27 | Study on Phase Separation in Supersaturated Solid Solutions of Aluminium Alloys by Means of X-ray and Neutron Small Angle Scatteriag Measurements | K. Osamura |
| 28 | Electrochemical Behavior, Structure and Composition of Oxide Films Formed on Aluminium and Iron in Neutral Solutions | M. Nagayama |
| 29 | The Solidification of Eutectic Alloys: | A. Ohno |
| 30 | Effect of Scratching on Precipitation in an Al-4%Cu Alloy | K. Okada |
| 31 | Growth Condition for Preparation of Polycrystalline Pure Aluminum Cast Bars Having Crystallographic Orientation Three Dimensionally Controlled | S. Oya |
| 32 | Irregular and Elongated Interfacial Cell Morphologies in Aluminum and Al-Cu Alloys Unidirectionally Solidifying in Different Crystallographic Orientations | S. Oya |
| 33 | Hexagonal and Broken Cell Morphologies of Solid-liquid Interfaces having Various Growth Orientations in Al-Cu Alloys Unidirectionally Solidifying | S. Oya |
| 34 | Preferred Orientation of Columnar Crystals in Unidirectionally Solidified Pure Aluminum | S. Oya |
| 35 | Oxidation Kinetics of Aluminum Single Crystals in a Transmission Electron Microscope | K. Shinohara |
| 36 | Deformation Texture of Aluminum Single Crystals | K. Shinohara |
| 37 | Characteristics of Aluminium as Revserve and Primary Cell Anodes | S. Tajima |
| 38 | Luminescence, Breakdown and Colouring of Anodic Oxide Films on Aluminium | S. Tajima |
| 39 | Mechanism of Friction at the Interface between Tool Surface and Metals in Hot Extrusion of Aluminium Alloys ―Effects of Dies and Extrusion Temperature― |
M. Tokizawa |
| 40 | Acoustic Emission during Plastic Deformation of Aluminum Bicrystals | M. Ueda |
| 41 | Dilatometric Study on the Thermal Defects in NiAl | K. Watanabe |
| 42 | Precipitate Free Zones in Crystal Grains of Al-9 at%Mg Alloy | K. Watanabe |
| 43 | Tensile Behavior of the γ-phase in Al-Mg System at Elevated Temperatures | K. Watanabe |
| 44 | Effect of Small Amount of Misch Metal on the Recrystallization Temperature of Al-Zr Alloys | H. Yamada |
| 45 | Effect of Precipitation Treatment on the Recrystallization Temperature of Al-Zr and Al-Zr-Misch Metal alloys | H. Yamdada |
| 46 | On the Material Characteristic in Torsional Deformation of Aluminium Wire | H. Yamamoto |
| 47 | On the Relation between Rotating of Axial Orientation and Deformation Banding during Drawing of Aluminium Single Crystal | H. Yamamoto |
| 48 | Interdiffusion in Al-Zn Alloys Measured by the Electric Resistance | T. Yamane |
| 49 | Formation Process of Vacancy Clusters in Quenched Metals | S. Yoshida |
| 50 | Effect of Foreign Elements on the Formation of Dislocation Loops in Quenched Aluminum | S. Yoshida |
| 51 | The Climbing Motion of Faulted Dislocation Loops Induced by Elastic Interaction | S. Yoshida |
| 52 | Study on Drilling Mechanism of Aluminium Alloys (V) STUDIES ON THE ACCURACY IN DRILLING OF ALUMINIUM |
S. Zaima |
| 53 | Study on the Residual Stress on Cut Surface of Aluminium (I) CONSIDERATIONS ON THE CHARACTERISTICS OF A MACHINED SURFACE OF ALUMINIUM IN UP MILLING AND DOWN MILLING |
S. Zaima |
| 54 | Study on the Reisudal Stress on Cut Surface of Aluminium (II) PHOTO-ELASTIC CONSIDERATION ON THE STRESS STATES IN WORK MATERIALS DURING METAL MACHINING |
S. Zaima |
| 55 | Study on the Machinability of Aluminium Alloy (XXV) ON THE WET CUTTING OF COMMERCIAL PURE ALUMINIUM |
S. Zaima |
| 56 | Study on the Residual Stress on Cut Surface of Aluminium (III) ON THE RESIDUAL STRESS IN THE ORTHOGONAL CUT SURFACE OF ALUMINIUM |
S. Zaima |