Metallurgical Asstracts on Light Metal and Alloys

vol.10

INDEX

No Title Author
1 Internal Stress in High Temperature Deformation of Aluminium M. Adachi
2 Study on the Unidirectionally Solidified Al-33wt. % Cu Alloy K. Hashiura
3 Analysis of Contact Form between Black and Roller in Shear Spinning M. Hayama
4 Estimation of Working Forces in Shear Spinning M. Hayama
5 Effect of Temperature on Mechanical Properties of Rapidly Solidified Al-1wt%Zr Alloys R. Ichikawa
6 Mechanical Properties of Al-Zr-Cr and Al-Zr-Mn Ternary Alloys Obtained by Rapid Solidification R. Ichikawa
7 Grain Refinement in Aluminium-Zirconium and Aluminium-Titanium Alloys by Metastable Phases R. Ichikawa
8 Some Crystal Boundary Phenomena in Aluminium Bicrystals F. Inoko
9 Formation of Crystal Boundary in Aluminium Bicrystals F. Inoko
10 The Tensile Deformation of Aluminium Bicrystals with Σ 7 Coincidence Boundary F. Inoko
11 Effects of Tin Addition on Low Temperature Ageing Aluminium-Copper Alloy H. Kimura
12 Roles of Lattice Defects in Ageing Alloys H. Kimura
13 Ductile Fracture of Aluminium-Silicon Alloy S. Koda
14 Study on the Process of Cold Welding of Aluminium (I) H. Kudo
15 The Work-hardening of Aluminium Alloy Single Crystals Containing Silicon Particles K. Matsuura
16 Studies on Microstructure and Stress-Corrosion Cracking Behaviour of Al-Zn-Mg Alloys with or without the Additional Elements Ag, Cu, or Li by Using Orientation-Controlled Bi-Crystals Y. Murakami
17 Small Angle X-Ray Critical Scattering in an Al-Zn Alloy with the Critical Composition Y. Murakami
18 On the Structure of Unidirectionally Solidified Al-NiAl3 and Al-CO2Al9 Eutectic Alloys Y. Nakatani
19 The Basal Slip in Single Crystals of Mg3Cd Alloy Y. Nakayama
20 Wear of High Strength Wrought Aluminium Alloys K. Okabayashi

Back to top

21 On the Elementary Study of Deep-drawability of Aluminium Alloys due to Alloying Elements K. Okada
22 On the Forging Dies of Superhard Materials (IV)
RUPTURE OF CYLINDRICAL DIE INSERT
J. Seino
23 Distribution of Species on Abraded Surfaces of Aluminium Revealed by Auger Electron Spectroscopy N. Takahashi
24 Growth of G.P. Zones and θ"-phases in Al-4% Cu Alloys T. Takahashi
25 Cast Structure and Mechanical Properties of Al-Sn Alloys M. Tsuda
26 Properties of Al-Sn Bearing Alloys at High Temperature M. Tsuda
27 Effect of Electric Wave Form on Hard Anodizing of Aluminium S. Ueda
28 Effect of Initial Current Density and Shape of Specimen on the Growth of Abnormal Layer in Hard Anodizing of Aluminium S. Ueda
29 Study on the Phase Diagram in Al-corner of Al-Cu-In Alloy System H. Watanabe
30 The Role of Grain Boundary Sliding in the Superplastic Deformation of an Al-Zn-Mg Alloy M. Yamada
31 Study on Hot Machining of Some Hard-machining Alloys (III)
SOME CONSIDERATIONS ON HOT MACHINING OF HIGH SILICON ALUMINIUM CAST ALLOYS
S. Zaima
32 Study on Mechanism of Drilling Aluminium Alloys (I)
SOME CONSIDERATIONS ON THE BEHAVIOR OF BUILT-UP EDGES IN DRILLING ALUMINIUM ALLOYS
S. Zaima
34 Study on the Machinability of Aluminium Alloys (XXI)
SOME CONSIDERATIONS ON THE EFFECTS OF COPPER AND SILICON ON THE MACHINABILITY OF COPPER SILUMIN
S. Zaima
33 Study on the Mechanism of Cutting Aluminium (XXI)
ON THE BEHAVIOR OF BUILT-UP EDGE IN CUTTING OFF ALUMINIUM ALLOY RODS
S. Zaima
35 Study on the Mechanism of Cutting Aluminium (XXII)
SOME CONSIDERATIONS ON THE MECHANISM OF ORTHOGONAL CUTTING OF ALUMINIUM
S. Zaima
36 Study on the Mechanism of Cutting Aluminium (XXIII)
SOME CONSIDERATIONS ON SHEAR MECHANISM IN MACHINING OF ALUMINIUM
S. Zaima
37 Study on the Mechanism of Cutting Aluminium (XXIV)
SOME PHOTOELASTIC CONSIDERATIONS OF ORTHOGONAL CUTTING OF ALUMINIUM
S. Zaima

Back to top