Metallurgical Asstracts on Light Metal and Alloys

vol.9

INDEX

No Title Author
1 Deformation Resistance in High Speed Cold Rolling of Aluminium and Aluminium Alloys I. Gokyu
2 On the Bulge Test of Aluminium Foil at Elevated Temperature S. Inada
3 Electrochemical Studies on the Dissolution and Deposition of Aluminium in Molten Aluminium Chloride-Alkali Chloride Systems (I)
EQUILIBRIUM POTENTIAL OF CHLORINE ELECTRODE AND OF ALUMINIUM ELECTRODE IN MOLTEN AlCl3-NaCl MIXTURES
T. Ishikawa
4 Electrochemical Studies on the Dissolution and Deposition of Aluminium in Molten Aluminium Chloride-Alkali Chloride Systems (II)
SOLUBILITY OF SILVER CHLORIDE AND BEHAVIOR OF A SILVER REFERENCE ELECTRODE IN A MOLTEN CHLORIDE-SODIUM CHLORIDE SYSTEM
T. Ishikawa
5 Electrochemical Studies on the Dissolution and Deposition of Aluminium in Molten Aluminium Chloride-Alkali Chloride Systems (III)
STUDIES ON THE ELECTROCHEMICAL DEPOSITION AND DISSOLUTION OF ALUMINIUM AND THE CODEPOSITION OF ALKALI METALS WITH ALUMINIUM IN MOLTEN ALUMINIUM CHLORIDE-ALKALI CHLORIDE MIXTURES
T. Ishikawa
6 X-ray Topographic Study of Isothermally and Thermal-cyclically Annealed Aluminium H. Kaieda
7 Fundamental Studies on Coloring of Alumina (VI)
INTEGRAL COLORING ANODIC OXIDE FILMS ON ALUMINIUM WITH SULPHURIC ACID
S. Kimura
8 Residual Stresses in Hydrostatically Extruded Aluminium Rods S. Miura
9 Effect of Grain Boundary on Plastic Deformation of Aluminium Isoaxial Bicrystals S. Miura
10 Effect of Grain Boundary on Plastic Deformation of Coarse-grained Aluminium Crystals S. Miura
11 {1122} 〈1123〉 Slip System in Magnesium S. Morozumi
12 Twinning Deformation in Magnesium Compressed along the C-axis S. Morozumi
13 Study of G.P. Zones in a Binary Al-10 at% Zn Alloy Y. Murakami
14 X-Ray Study of G.P. Zones in Ternary Al-Zn-Mg Alloys Y. Murakami
15 Effect of Grain Boundary on Deformation of Aluminium Bicrystals F. Seki
16 Study on the Phase Diagram in the Al-corner of Al-Cu-Cd Ternary Alloy System H. Watanabe
17 Study on the Diagram in the Al-corner of the Al-Cu-Sn Ternary Alloy System H. Watanabe
18 Rate of Solidification of Al-Zn-Mg Cast Alloys during Casting and Its Effect on Their Age-hardening Characteristic H. Yamada
19 Effect of Lubricating Method on Dimensional Accuracy and Surface Roughness of Drilled Hole in Aluminium Alloys A. Yuki

Back to top