INDEX
| No | Title | Author |
|---|---|---|
| 1 | Effect of Zr on the Recrystallization Temperature and the High Temperature Strengh of Al-Ag, Al-Ni and Al-Zn Alloys. | H. Asada |
| 2 | Investigation of Protective Films on Aluminium Formed during Electrolytic and Chemical Polishing. | E. Raub |
| 3 | Effect of Welding Conditions on the Strength of Welded Aluminium Alloy Members. | K. Fujita |
| 4 | On the Impact Deformation of Light Metals. | I. Gokyu |
| 5 | On the Warm Working of Light Metals (I). | I. Gokyu |
| 6 | On the Warm Working of Light metals (II). | I. Gokyu |
| 7 | Study on the Modification of Al-Si Alloy (20% Si) by Polytetrafluro- ethylene (II). | K. Hashiura |
| 8 | Study on the Modification of Al-Si Alloy (20% Si) by Polytetrafluoro- ethylene (III). | K. Hashiura |
| 9 | Hot-Dip Aluminium Coating on Steel (IX). On Some Phenomena Produced on Heating Aluminized Steel. | M. Tagaya |
| 10 | On the Damping Capacity of Magnesium and its Alloys. | R. Ichikawa |
| 11 | The Distribution of Beryllium and the Grain Size in Mg-Al Alloys Containing Beryllium. | R. Ichikawa |
| 12 | On the Annealing of Cold-Rolled Poly-crystalline Aluminium of Commercial Purity at 300 °C. | T. Igarashi |
| 13 | Annealing of Cold-Rolled Aluminium Alloys (I). Study on Al-Pb Alloys. | T. Igarashi |
| 14 | Annealing of Cold-Rolled Aluminium Alloys (II). Study on Al-Cu, Al-Fe, Alloys. | T. Igarashi |
| 15 | Annealing of Cold-Rolled Aluminium Alloys (III). Study on Al-Mn, Al-Sn Alloys. | T. Igarashi |
| 16 | On the Bulge Test of the Aluminium Foil. | S. Inada |
| 17 | Weathering Pit Formation on Surface of Aluminium Sheet. Effect of Dissolved Oxygen in Pure Water. | S. Ishida |
| 18 | On the Equilibrium Diagram of Aluminium-Nickel-Titanium Ternary System. | K. Kamei |
| 19 | Interaction between Dislocation and θ' Precipitates in an Aluminium-Copper Alloy. | S. Koda |
| 20 | Direct Observation of Change from θ' to θ Phase in Precipitation of an Aluminium-Copper Alloy. | S. Koda |
| 21 | Effect of Cold-Working on Low Temperature Electrical Resistivity of Aluminium. | G. Mima |
| 22 | Study of the Recovery of Aluminium Twisted at Low Temperatures. | G. Mima |
| 23 | Study on the Deformation of Grain-Boundary Region in Pure Aluminium Bicrystals. | G. Mima |
| 24 | On the Utilization of Aluminium and its Alloys in the Wine and Brandy Industry. | T. Morinaga |
| 25 | Influence of Solidification Rate on Grain Refinement of Cast Structure of 22% Silicon-Aluminium Alloy with or without Phosphorus Addition. | S. Morita |
| 26 | Influence of Phosphorus on Grain Refinement of Cast Structure of 22% Silicon-Aluminium Alloy. | S. Morita |
| 27 | Influence of Melting Condition and Addition Temperature on Grain Refinement of Cast Structre of 22% Silicon-Aluminium Alloy with Phosphorus Addition. | S. Morita |
| 28 | Considerations on the Behavior of Phosphorus for the Grain Refinement of 22% Silicon-Aluminium Alloy. | S. Morita |
| 29 | Electron-Microscopic Investigation on Precipitation Phenomena in Aluminium-Zinc Alloy. | Y. Murakami |
| 30 | Aging Characteristics and Effects of Plastic Deformation on Precipi- tation in Al-4% Cu and Al-20% Ag Alloys with or without Trace Elements. | Y. Murakami |
| 31 | The High-Temperature Strength and Structure of the Al-Zn Binary Alloys. | Y. Murakami |
| 32 | The High-Temperature Strength and Structure of the Al-MgZn2 Quasi- Binary Alloys. | Y. Murakami |
| 33 | On the Study of Aluminium-Thorium Alloys (I). The Effect of Thorium on the Properties of Aluminium Alloys. | S. Muromachi |
| 34 | Study on Macrostructure of Aluminium Alloy. | Y. Nakao |
| 35 | Square wave AC Bridge Polarograph. | E. Niki |
| 36 | The Influence of Alloy Composition on the Prevention of Ignition Due to Beryllium Addition to Magnesium Alloys. | S. Nishi |
| 37 | Viscosity of Aluminium Electrolyte (I). | K. Nishihara |
| 38 | Viscosity of Aluminium Electrolyte (II). | K. Nishihara |
| 39 | Effect of Gas-treatment on the Structure of Hypereutectic Al-Si Alloys. | I. Obinata |
| 40 | Formation of Crystal Structures in Pure Aluminum. | S. Oya |
| 41 | Study on the Wear of Casting Aluminium Alloys (I). On the Wear Characteristics | K. Okabayashi |
| 42 | Study on the Wear of Casting Aluminium Alloys (II). On the Frictional Characteristics | K. Okabayashi |
| 43 | On the Mechanical Polishing of Aluminium and Aluminium Alloys (II). On the Surface Grinding Operation of Aluminium | T. Orioka |
| 44 | Study on the Castability of Ternary Aluminium Alloys. | R. Ozaki |
| 45 | Influence of Yttrium on the Recrystallization Behaviour of High-Purity Aluminium. | K. Shimizu |
| 46 | A Study on the Thermal Reduction of Magnesium by Silicon (I). Effects of Additions | S. Takagi |
| 47 | Quenched-in Vacancies in Dilute Al-Mg Alloys. | J. Takamura |
| 48 | A Study of Quenched-in Vacancies in Dilute Al-Zn Alloys. | J. Takamura |
| 49 | The Behaviour of Carbon in Aluminum and Aluminum Alloys (II). | T. Takase |
| 50 | Statistical Analysis of the Formation and Dissolution of Anodic Oxide Films on Aluminium. | S. Tajima |
| 51 | Optical Studies on Various Anodic Oxide Films on Aluminium. | S. Tajima |
| 52 | Wear Resistance Properties of Hard Anodized Coatings (I and II). | S. Ueda |
| 53 | Studies on the Physical Metallurgy of Al-Ag Binary Alloy. | H. Watanabe |
| 54 | A Fundamental Study on the Casting Crack of Light Metal Alloys. Relation between the Casting Contraction Stress and the Hot Strength. | H. Watanabe |
| 55 | Studies on Aluminum Enamelling (I). Pretreatment of Aluminum Plate for Borosilicate System Frit. | T. Yamada |
| 56 | Studies on Aluminum Enamelling (II). On the Pretreatment of Aluminum Plates for Lead and Phosphate System Frit. | T. Yamada |
| 57 | Studies on Aluminum Enamelling (III). Pretreatment of Aluminum Alloys, 3S, 52S and 61S for Lead System Frit. | T. Yamada |
| 58 | Studies on Aluminum Enamelling (IV). Effect of Mill Agent on Aluminum Enamel. | T. Yamada |
| 59 | Studies on Aluminum Enamelling (V). Electroplating of Aluminum with Fused Salt AlCl3 and Application of Aluminum Frit to Plated Surface. | T. Yamada |
| 60 | Studies on Aluminum Enamelling (VI). Glazing of Aluminum Frit on Aluminized Steel Plates. | T. Yamada |
| 61 | Studies on Aluminum Enamelling (VII). Efflorescence of Aluminum Enamels. | T. Yamada |
| 62 | Studies on Aluminum Enamelling (VIII). On the Pretreatment of Aluminum Plates (1S, 2S) and its Influence on Enamelling. | T. Yamada |
| 63 | Electron Microscope Studies of Deformed Magnesium. | S. Yoshioka |
| 64 | Consideration and Summaries of the Experiments on the Aluminium Alloy Casting of JIS (I). On the Damping Capacity and the Fatigue of Cast Al-Cu Alloys. | S. Zaima |
| 65 | Consideration and Summaries of the Experiments on the Aluminium Alloy Casting of JIS (II). On the Properties of Universal Foot Pressing Iron Made From Aluminium Cast Alloy AC2A. | S. Zaima |
| 66 | Consideration and Summaries of the Experiments on the Aluminium Alloy Casting of JIS (III). On the Mechanical Properties of Miniature Lader Parabolic Reflector Made From Al-7% Si Alloy. | S. Zaima |
| 67 | Consideration and Summaries of the Expeiments on the Aluminium Alloy Casting in JIS (IV). On the Mechanical Properties of Suspension York Made From 10% Hydronarium (AC7BT4). | S. Zaima |
| 68 | Study on the Control of Directionality and Earing of the Aluminium Sheets (I). The Influence of the Composition Ratio Fe : Si on the Earing in the Deep Drawing of Aluminium Sheets. | S. Zaima |